Search found 9 matches

by CapnBio
Wed May 12, 2021 8:19 pm
Forum: Ninebot Max
Topic: Ninebot Max 72V battery
Replies: 4
Views: 7155

Re: Ninebot Max 72V battery

As far as I am aware from experience from others, 72 volts might be "overkill" for the ESC (motherboard) I am not 100% sure on that so don't quote me on it. This is something I have thought of doing as well but I don't want to spend the $100+ for a new board. Someone in the forum was able to get a 5...
by CapnBio
Sat Sep 26, 2020 1:55 pm
Forum: Ninebot Max
Topic: Ninebot KS Max - Remove Kick to Start Requirement
Replies: 1
Views: 3381

Re: Ninebot KS Max - Remove Kick to Start Requirement

Have you tried to upload a cfw?
by CapnBio
Sun Mar 08, 2020 1:27 am
Forum: Ninebot Max
Topic: Max dashboard BLE555 ST-Link guide (flash CFW)
Replies: 26
Views: 60418

Re: Max dashboard BLE555 ST-Link guide (flash CFW)

Hey guys, this actually had worked for me. I rewired the dash wires to where they'd be with the stock wire (or get a new one) and I was able to flash drv with esdowng. From what I've noticed the Bluetooth is only on for about a minute so you can quickly connect to it and fully flash the OEM or cfw. ...
by CapnBio
Sun Mar 01, 2020 4:01 pm
Forum: Ninebot Max
Topic: Installing G30 Folding Mechanism
Replies: 3
Views: 8425

Re: Installing G30 Folding Mechanism

So, there is a much much easier way of doing this, I also converted my scooter to a folding one as well, I actually have a 3d printer, printed a collar in about 3 hours, I just smashed it right in on a tight fit. https://i.imgur.com/0qsoyV1.jpg It really works well, I don't have to do anything extra...
by CapnBio
Sat Feb 29, 2020 2:02 pm
Forum: Ninebot Max
Topic: Guide to Flashing your spin Max or Lyft max?
Replies: 4
Views: 6057

Re: Guide to Flashing your spin Max or Lyft max?

Thanks guys! I had already made the effort to order the st-link v2, it should be in today, hopefully all goes well.
by CapnBio
Fri Feb 28, 2020 11:49 pm
Forum: Ninebot Max
Topic: Dual Charge
Replies: 1
Views: 3043

Re: Dual Charge

I remember seeing a video on YouTube at with the es series. I'm thinking it might be the same but with a Y connector and a custom connector for the BMS maybe. You'd definitely would have to drill a hole somewhere for sure.
by CapnBio
Fri Feb 28, 2020 5:36 pm
Forum: Ninebot Max
Topic: Guide to Flashing your spin Max or Lyft max?
Replies: 4
Views: 6057

Guide to Flashing your spin Max or Lyft max?

Anyone can point me to flash the spin Max without an St link v2? Soldering skills are really bad, I did get the cp2102 since I saw it seemed possible. Guides or anything would be really awesome.
by CapnBio
Fri Feb 28, 2020 11:40 am
Forum: Ninebot ES and E-series
Topic: Ninebot IAP guide - how to flash your scooter with a cable
Replies: 45
Views: 126870

Re: Ninebot IAP guide - how to flash your scooter with a cable

Any idea if this would work on the Max? Trying to figure it out, and don't exactly want to solder anything, and my soldering skills are super bad. I did find a not so guide but it definitely did not work.

The wiring goes from the bms port
Red = GND, White = RX, Yellow = TX
by CapnBio
Sat Feb 22, 2020 6:47 pm
Forum: Ninebot Max
Topic: How to dump the BMS of your Ninebot Max / G30
Replies: 8
Views: 21512

Re: How to dump the BMS of your Ninebot Max / G30

Is there any way to do this without opening up the casing and taking everything apart?

Go to advanced search