Search found 14 matches
- Wed Jun 19, 2019 2:32 am
- Forum: Ninebot ES and E-series
- Topic: CFW Generator not working
- Replies: 10
- Views: 10304
Re: CFW Generator not working
Not currently working for me either.
- Wed Jun 19, 2019 2:22 am
- Forum: Ninebot ES and E-series
- Topic: need a little help
- Replies: 10
- Views: 9689
Re: need a little help
So i finally got this worked out and changed the serial numbers then reflashed using EsDownG. I thought i'd be able to control mode and lights within the app as a result but see no such options.
What gives?
- Wed Jun 19, 2019 1:06 am
- Forum: Ninebot ES and E-series
- Topic: ES4 Error 10
- Replies: 77
- Views: 111001
Re: ES4 Error 10
Everything seemed to go ok. it was certainly hard to solder to that board! I now have an error 19 I am not sure if it is related to this as the batteries have not been properly charging since I got it. when I plug It in it goes green then red like its charging and then back to green. Do you have an...
- Sun Jun 16, 2019 10:18 pm
- Forum: Ninebot ES and E-series
- Topic: need a little help
- Replies: 10
- Views: 9689
Re: need a little help
So just use the serial number on the bottom of the actual scooter?I thought I saved the picture, I think it is on this forum somwhere. It shows the difference in serial numbers and letters. It's pretty easy to read what needs to be changed. Let me dig around and see if I can find it.
- Sun Jun 16, 2019 4:27 pm
- Forum: Ninebot ES and E-series
- Topic: need a little help
- Replies: 10
- Views: 9689
Re: need a little help
may have figured it out i used es roll back to get the recovery file for drv 133 then i flashed with stlink ill update if i can change serial in am I've seen all these threads but i can't figure out what to change the serial number too. What did you change the serial number too with Ninebot Flasher?
- Sun Jun 16, 2019 4:25 pm
- Forum: Ninebot ES and E-series
- Topic: Making a non foldable, foldable..
- Replies: 3
- Views: 5197
Re: Making a non foldable, foldable..
It's pretty much impossible. You would need weld and use an angle grinder. also you would need to use some kind of 3rd party hinge with a locking mechanism. It's not worth the time Nahhh come on maybe he has all the equipment, for a scooter, what cant be done. I saw someone dl a cad mapping of a hi...
- Sat Jun 15, 2019 3:34 pm
- Forum: Ninebot ES and E-series
- Topic: Unable to find address when reprogramming Motherboard ES4
- Replies: 2
- Views: 4088
Unable to find address when reprogramming Motherboard ES4
I cannot locate the final address in the listed steps and thus can't get rid of error 27 when reprogramming main board. 1) Acquired what looks to be like a brand new Bird Es4 2) Ordered OEM dash and flashed it without issue 3) Installed OEM dash but continued to get Error 27 4) Pulled apart the main...
- Thu Jun 13, 2019 1:49 am
- Forum: Ninebot ES and E-series
- Topic: ES4 Error 10
- Replies: 77
- Views: 111001
Re: ES4 Error 10
Are you guys using amazon $30 dashboards with this? Which serial number do we use? One off the frame or made up as long as ESC and Dash match or? Thank you I have used an OEM dash and a 28 dollar knock off. Both worked, the OEM dash i didn't have to solder and reprogram but the knock off I did. I d...
- Wed Jun 12, 2019 11:16 pm
- Forum: Ninebot ES and E-series
- Topic: ES4 Error 10
- Replies: 77
- Views: 111001
Re: ES4 Error 10
Are you guys using amazon $30 dashboards with this? Which serial number do we use? One off the frame or made up as long as ESC and Dash match or? Thank you I have used an OEM dash and a 28 dollar knock off. Both worked, the OEM dash i didn't have to solder and reprogram but the knock off I did. I d...
- Wed Jun 12, 2019 4:37 pm
- Forum: Ninebot ES and E-series
- Topic: ES4 Error 10
- Replies: 77
- Views: 111001
Re: ES4 Error 10
I just flashed the ESC, and just like another community member reported, I am unable to find location: 0x0801C1B4 here is a screen shot of what I have - the closest I can find is 0x0801CB40 (there is no address that has a C1) any suggestions? ST-UTILITY SCREENSHOT: http://prntscr.com/o0yvvs I found...