Search found 17 matches

by wielandgeorg
Thu Dec 19, 2019 5:15 am
Forum: Ninebot Max
Topic: Ninebot Max ESC/DRV ST- Link - unbrick your Max ESC
Replies: 9
Views: 47656

Re: Ninebot Max ESC/DRV ST- Link - unbrick your Max ESC

I followed this guide but couldnt get it to connect at first. Finally I figured it out ESC out of the scooter on the table= connect all 3 wires from STlink as shown. Connect the 5v power wire from STlink to the red power wire that goes to the dash from the ESC. Dash can be connected too while doing ...
by wielandgeorg
Wed Jul 24, 2019 3:10 am
Forum: Ninebot ES and E-series
Topic: Top speed breaking
Replies: 10
Views: 12281

Re: Top speed breaking

Change the KERS to the max speed for no breaking
even with kers changed it still brakes while on throttle unless you let off the throttle then it just free rolls?

it would be awesome if someone could find a way around the auto braking
by wielandgeorg
Wed Jul 24, 2019 3:06 am
Forum: Ninebot ES and E-series
Topic: ES4 top speed questions. it brakes at 21mph?
Replies: 21
Views: 23183

Re: ES4 top speed questions. it brakes at 21mph?

Sure wish someone with knowledge in this area would chime in and give us some insight on how to possibly adjust this.
by wielandgeorg
Wed Jul 24, 2019 3:05 am
Forum: Ninebot ES and E-series
Topic: Alternate to soldering?
Replies: 2
Views: 4203

Re: Alternate to soldering?

Hi! I've flashed a dozen dashboards using the frame with needles instead of soldering. Way better solution IMO

https://www.amazon.com/Programmer-Farwa ... way&sr=8-1

Take care
by wielandgeorg
Tue Jul 23, 2019 3:34 am
Forum: Ninebot ES and E-series
Topic: ES4 Error 10
Replies: 77
Views: 102983

Re: ES4 Error 10

eli.75 I think you are getting that error message because theres either something crossed out or not making contact! I've gotten that same "no stlink detected" message while probing the ESC with my BDM frame and it did not connect. If you order you the BDM frame and use that it will be a lot easier...
by wielandgeorg
Tue Jul 23, 2019 3:33 am
Forum: Ninebot ES and E-series
Topic: ES4 Error 10
Replies: 77
Views: 102983

Re: ES4 Error 10

would anyone be willing to ship a working dashboard already? I just can't seem to be able to solder correctly. it just won't connect. & in the process I think I desolder one of the points I needed. ebay, paypal, cash app, post office with tracking number, zelle how every you want, and think it's be...
by wielandgeorg
Mon Jul 08, 2019 7:00 pm
Forum: Ninebot ES and E-series
Topic: ES4 Error 10
Replies: 77
Views: 102983

Re: ES4 Error 10

^^ glad you got it working! I figured it was just the connections
by wielandgeorg
Sun Jul 07, 2019 4:33 am
Forum: Ninebot ES and E-series
Topic: ES4 top speed questions. it brakes at 21mph?
Replies: 21
Views: 23183

ES4 top speed questions. it brakes at 21mph?

So ive learned a lot about these and I have helped people on here but I have some questions. I have CFW 1.3.9 I burned up a ESC after disabling kers on my ES4 but my MPC # was like 48,000 or so. My friend was riding it and suddenly the motor was rough and i thought it was the motor but its actually ...
by wielandgeorg
Sun Jul 07, 2019 4:28 am
Forum: Ninebot ES and E-series
Topic: Segway ninebot es4 problem
Replies: 4
Views: 7069

Re: Segway ninebot es4 problem

30 mph? every time I get to 21mph it brakes and doesnt go past that. How did you get it to go 30?

you can also just put a 33 ohm 1/4watt resistor between negative wire of the headlight and it should solve it

cheers
by wielandgeorg
Sun Jul 07, 2019 4:24 am
Forum: Ninebot ES and E-series
Topic: Unable to find address when reprogramming Motherboard ES4
Replies: 2
Views: 3883

Re: Unable to find address when reprogramming Motherboard ES4

I've fixed error 27 and finally found out how to go to the address needed. What you do is go the actual address box on the top left of the screen and manually type in the first address before flashing and press enter. take a pic of the 0,4,8 boxes and than press ctrl p and program. Afterwards go bac...

Go to advanced search