Rental scooters always have this error after being flashed, you need to turn the wheel upon startup for it to go away, XiaoDash removes this error entirely tho.

I rode mine on 84V with snsc motor and it ran 65Kmh plus, no worries, just keep tire pressure up.

So there seems to be a lot of misconception on the bms topic so here is an update. Forget what is said in the first paragraphs, never bypass via Software and if you bypass, do it properly, properly meaning, take the Output connectors Plus cable and cut it at the BMS, the cut the Plus cable that runs...

Updated SNSC2.4 Update So the 2.4 is a little bit more work, but its got the best results, so the Dashboard is useless, throw it out with the steering pole, and change it to a 2.3 Steering pole and head, ESC same, SNSC 2.3 Esc, Snsc 2.3.3 may work, but the Dash button has problems on some ESC‘s, so ...

Put the controller and the screen from the usual g30 and there are no problems

Thats way too expensive and looks janky, also have to do lots of rewiring, just flash snsc 2.3 ESC and you are good to go, its more reliable and looks cleaner, also dont have to rewire all the cables

Put the controller and the screen from the usual g30 and there are no problems

Thats way too expensive and looks janky, just do it properly once and the scooter is cheap, looks clean and is reliable.

Hey guys, regarding the 15300Mah battery, i did some testing and from the looks of it its only flashable via an Voi ESC, Bolt or others wont work, beste way to bypass is connecting the - output of the port to minus on the pack, you can either put it directly on the pack or connect it to the bms inpu...

Hello, as you may have already noticed Tier changed their fleet models from Okai to segway, i am interested in converting these scooters and posting a tutorial just like my SNSC post. Everything i know so far: The BMS will work as long as the original Controller is connected, and will allow you to d...

Thank you for your reply I have managed to get the scooter moving but after riding it for about 3 seconds it cuts out and the dashboard resets I don't get any error codes I have tried to flash the battery with a couple of apps it tells me it has been flashed but when I check it it still tells me th...

Hi !

Thank you for your good job ! :)

Do you have a solution (or a binary file for flashing the BMS) for a Ninebot battery of 27900mah / 1004wh / 36v ???
The BMS cut the power after 1 second of use... it's the Ninebot protection ! :)

Thank you so much !

Flash until bricked or bypass bms