Search found 79 matches
- Sat Jan 13, 2024 9:57 pm
- Forum: Ninebot ES and E-series
- Topic: Recommended supplier for ESx control board and LED ground effect strip
- Replies: 10
- Views: 8352
Re: Recommended supplier for ESx control board and LED ground effect strip
So, it seems there's some confusion about the underglow LEDs on the ES1-4 and making them work either after the scooter has had some work done, or the settings have been modified via cfw. So, here's all you need to know about ensuring they are working properly on your scooter. If you have made some ...
- Tue Jul 04, 2023 5:29 am
- Forum: Ninebot Max
- Topic: HELP, Max firmware 8.1.8 has an extra security measure built into the battery that affects the ESC and dash.........
- Replies: 9
- Views: 8232
Re: HELP, Max firmware 8.1.8 has an extra security measure built into the battery that affects the ESC and dash.........
The ground BMS bypass does technically work to operate the scooter, but I would only do this with extreme caution as now you've removed all the battery protection and cell balance charging as well. The best solution if you can't flash firmware 8.1.8, is to get a blank Ninebot G30 BMS from AliExpres...
- Mon Jan 30, 2023 1:42 pm
- Forum: Ninebot ES and E-series
- Topic: External battery red side lights
- Replies: 5
- Views: 5188
Re: External battery red side lights
SHFW does disable the side lights, yes. Is there a fix or patch for this yet? I often make custom ES4s, E22s, E45s, etc for various customers involving custom paint, graphics, and even the external battery LEDs get changed to different colors upon request. It's unfortunate that I cannot apply SHFW ...
- Mon Jan 30, 2023 1:32 pm
- Forum: Ninebot ES and E-series
- Topic: Did I destroy my controller?
- Replies: 2
- Views: 3997
Re: Did I destroy my controller?
not sure if you still need help with this or not, but replacing capacitors on your board is a fairly simple process. If it was one of the smaller ones near the large one, you can replace it with another, as long as the value of the new capacitor is the same or slightly larger (just don't replace it ...
- Sun Jan 22, 2023 9:36 am
- Forum: Other Ninebot Scooters
- Topic: Ninebot-S (mini/pro) Speed Hack
- Replies: 1
- Views: 6389
Re: Ninebot-S (mini/pro) Speed Hack
Short answer: Yes. However, you should know the minipro has a higher speed when you attach it to the GoKart kit where I believe it can go almost a full 20mph. Which means that connecting it to the kit, allows it to go faster. I've been looking all around for the information on tricking the miniPro i...
- Thu Jan 12, 2023 12:25 am
- Forum: Ninebot ES and E-series
- Topic: Recommended supplier for ESx control board and LED ground effect strip
- Replies: 10
- Views: 8352
Re: Recommended supplier for ESx control board and LED ground effect strip
I need 2 components: a controller that supports LED ground effects a LED ground effects strip I bought a controller on Amazon and it does not support LED lights. Any supplier recommendations? What controller was it that you purchased? After you installed it, did you flash new stock firmware to it? ...
- Sun Dec 25, 2022 1:00 am
- Forum: Ninebot Max
- Topic: Need help diagnosing Ninebox G30P MAX
- Replies: 5
- Views: 3654
Re: Need help diagnosing Ninebox G30P MAX
The common issue with the Max G30 is the 3 phase wires getting too hot and melting together causing electrical issues at random. Usually the best fix for this is to either break away and clean the melted plastic to expose the metal bullet connectors (inside and out) and reinsulate with high quality ...
- Sun Dec 25, 2022 12:43 am
- Forum: Ninebot Max
- Topic: Firmware issue with 48v battery
- Replies: 5
- Views: 3987
Re: Firmware issue with 48v battery
Hey F0xMaster,DRV184 can only be flashed via ST-Link.
I really hate that I have to ask (the frustration from searching causes me intense rage), but can I trouble you for the pin out on flashing this newer ESC? The G30LD ?
- Sun Dec 25, 2022 12:24 am
- Forum: Ninebot ES and E-series
- Topic: Hacking Ninebot ES1LD
- Replies: 5
- Views: 6427
Re: Hacking Ninebot ES1LD
With cheap cost, you should replace controller and display from ES1. But doing it yourself can be risky death run 3d You can't simply swap the dashboard and controller from an ES1 to this scooter due to the lack of hall sensor on the motor. This scooter runs a sensorless 3 phase motor with no ble. ...
- Tue Dec 13, 2022 11:34 am
- Forum: Ninebot Max
- Topic: Tutorial!!! SNSC 2.3 Aka Ninebot Max Plus conversion
- Replies: 49
- Views: 126408
Re: Tutorial!!! SNSC 2.3 Aka Ninebot Max Plus conversion
Hey, unfortunately this isn’t possible, stock software on G30 doesn’t work via GPS cable, i think the Voi scooters have the only plug‘n play ones, there isn’t even a Pinout on these Dash‘s, just random solder pads all over the board, just rewire a G30 Max Cable, and it should work. I figured as muc...