Search found 10 matches
- Wed Sep 18, 2019 6:20 am
- Forum: Xiaomi Scooters
- Topic: M365 Pro street legal but with power?
- Replies: 1
- Views: 4096
Re: M365 Pro street legal but with power?
I wouldn't mind too much about this. Limited mine to 20km/h max to be compliant in Switzerland. Heaving read about overheaten M365 Pro controllers I'm fine with it. The guys at Rollerplausch adviced to even lower the curent settings for sports mode to save the components. I'd say better driving 16-1...
- Thu Sep 12, 2019 8:49 am
- Forum: Xiaomi Scooters
- Topic: Pro brake lever settings
- Replies: 10
- Views: 16498
Re: Pro brake lever settings
Btw: on github I found this explanation from BotoX: "Lever virtual limit: you can make it do 100% current earlier Like normal the max current is at about 2/3 of the lever pressed, you can make the range smaller with the limit" I think it means that the Lever virtual limit setting does shift the end ...
- Thu Sep 12, 2019 8:41 am
- Forum: Xiaomi Scooters
- Topic: Pro brake lever settings
- Replies: 10
- Views: 16498
Re: Pro brake lever settings
From what i've gathered, the position in which the KERS is activated depends on how they fitted the sensor in the brake lever. Some people have them start with barely touching the lever, others only at 50% of it's total travel length. Almost as if they do that part at the factory by hand. So, that ...
- Wed Sep 11, 2019 7:29 am
- Forum: Xiaomi Scooters
- Topic: Pro brake lever settings
- Replies: 10
- Views: 16498
Re: Pro brake lever settings
You can in fact install an ebrake lever (another Xiaomi or Ninebot one would do). I'd suggest leaving both of them connected if possible, dunno if that's possible. If it isn't, make sure not to brake with the disconnected mechanical lever if you're in cruise control mode. Yes - that's my plan: Moun...
- Tue Sep 10, 2019 8:23 pm
- Forum: Xiaomi Scooters
- Topic: Pro brake lever settings
- Replies: 10
- Views: 16498
Re: Pro brake lever settings
Just tested again: Pro brake lever settings at 60, then at 130, and at 60 again.. You're right about the higher value which makes braking a bit weaker, but honestly that's all I could realize. The position where Kers kicks in, remained the same. It is a tiny bit before the disk brakes are joining in...
- Tue Sep 10, 2019 12:59 pm
- Forum: Xiaomi Scooters
- Topic: Pro brake lever settings
- Replies: 10
- Views: 16498
Re: Pro brake lever settings
Really? :o Ok strange, I've tried your setting (60) but didn't notice a clear difference in kicking in the brake earlier. Instead it seemed to have kinda delay into it. After releasing the lever, you had to wait for a second or so to get KERS released. I still may be wrong. Could it be that the leve...
- Tue Sep 10, 2019 11:44 am
- Forum: Xiaomi Scooters
- Topic: Current settings for Drive mode
- Replies: 1
- Views: 7320
Current settings for Drive mode
Does anyone know why for the M365 Pro, the current settings for Drive mode can't be patched? It would be nice to patch max speed AND phase/battery currents in Drive mode for a balanced drive experience, and keep Sport mode settings for the power ride . Thanks
- Tue Sep 10, 2019 11:20 am
- Forum: Xiaomi Scooters
- Topic: Pro brake lever settings
- Replies: 10
- Views: 16498
Re: Pro brake lever settings
Currently I've set Brake Lever to "Lever virtual limit = 130, Minimum phase current = 6000, Maximum phase current = 60000, and KERS Minimum speed = 40 (M365 Pro) I'm not quite sure about the Lever virtual limit setting. From what I've read, a lower value means latest or least sensitive kick in of KE...
- Sun Sep 08, 2019 6:44 pm
- Forum: Xiaomi Scooters
- Topic: Battery voltage limit < 43.01 not allowed / bad idea?
- Replies: 3
- Views: 9255
Re: Battery voltage limit < 43.01 not allowed / bad idea?
Ok, think I found this out. The "Battery voltage limit" settings probably only are affecting the warning or cut off actions of the scooter during driving when for some reason the battery voltage is getting too high (i.e. excessive KERS recuperation downhill with fully loaded battery). The charging p...
- Wed Sep 04, 2019 11:45 am
- Forum: Xiaomi Scooters
- Topic: Battery voltage limit < 43.01 not allowed / bad idea?
- Replies: 3
- Views: 9255
Battery voltage limit < 43.01 not allowed / bad idea?
Hi, I have a Xiaomi M365 Pro and would like to possibly prolong its battery live (I mean the life of the battery before going dead as such, not the capacity/range per charge). Li-Ion cells can live longer if they are not 100% charged. And I won't use the battery maximum capacity anyway in my daily u...