Search found 6 matches

by F0xMaster
Mon Jun 01, 2020 11:35 am
Forum: Ninebot ES
Topic: Ninebot IAP guide - how to flash your scooter with a cable
Replies: 9
Views: 3604

Re: Ninebot IAP guide - how to flash your scooter with a cable

F0xMaster, Thank you for all your help. I was able to connect the bms port to a spin Max via this wiring; Red = GND, White = RX, Yellow = TX. Only the firmware for the BMS showed up as BMS134, DRV and BLE was not able to be read. I wanted to see if I would be able to flash anything and was able to ...
by F0xMaster
Sun May 31, 2020 1:29 pm
Forum: Ninebot ES
Topic: Ninebot IAP guide - how to flash your scooter with a cable
Replies: 9
Views: 3604

Re: Ninebot IAP guide - how to flash your scooter with a cable

HI, So just to be clear. I can theoretically use option 2 on a Lyft SNSC1/2 but still have to rewire the dash cable correct? I have have been digging around for info on this but everyone is focused on the MAX these days. Yes, IAP will work. And yes, you still have to rewire the dash because the IoT...
by F0xMaster
Tue Apr 28, 2020 10:16 am
Forum: Ninebot KS Max
Topic: how to unbrick Ninebot G30 D
Replies: 1
Views: 360

Re: how to unbrick Ninebot G30 D

The easiest way would be to ST-Link the controller, here's a guide:
https://bit.ly/2SaYn4s

the pinout should be the same regardless of scooter version.
by F0xMaster
Thu Mar 19, 2020 1:03 pm
Forum: Ninebot ES
Topic: BMS UART protocol?
Replies: 2
Views: 638

Re: BMS UART protocol?

If you can connect to the battery using a serial to USB adapter and want to see more details, you can use IAP versions 2.2.1 and higher coz they have this functionality (battery tab).
by F0xMaster
Tue Mar 03, 2020 10:22 am
Forum: Ninebot ES
Topic: Ninebot IAP guide - how to flash your scooter with a cable
Replies: 9
Views: 3604

Re: Ninebot IAP guide - how to flash your scooter with a cable

Any idea if this would work on the Max?
It should work if you have a rental Max or if you use the intermal BMS connector. Please note that some rental companies lock IAP mode. I also don't have a rental max on hand for testing, but other users reported success.
by F0xMaster
Sat Feb 22, 2020 12:45 pm
Forum: Ninebot ES
Topic: Ninebot IAP guide - how to flash your scooter with a cable
Replies: 9
Views: 3604

Ninebot IAP guide - how to flash your scooter with a cable

Hello, in this post I will show you how to use IAP with your ES/SNSC scooter. Please note that this guide only applies to the "serial" mode of IAP Required tools & software: A Windows 7 or higher PC If you're trying to run IAP on Windows 7, you will need .NET Framework v4.6.1 or higher. You can dow...

Go to advanced search