Hi How can I flash the controller Any link? Get started here for the controller: https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213 And here for the dashboard: https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213 I flash these devices disconnected from the scooter - meaning I do...

I had some issues too with the BLE. Take a look here for some things that helped me fix mine: https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=192&p=1394#p1394 Also, I had to manually rename 0x000201E4 for me to get a custom SSID. The sad part is when I first got the dashboard, I could chan...

The one problem I have is at normal switch-on, I get a code 27 error which, depending on the knowledge base, is either: 27 ESC config invalid or 27 Control Board Password Error If I hold the throttle at full and then turn it on and hold the throttle until code 14 appears and let go (about 2 seconds...

meister thanks for your help with all of this. how do I use the lyft control cable (5pin) with the OEM dash (4pin)? I already fried a dash I had when I got ahead of myself and plugged them together. I hope linking to another forum is allowed - I just believe in giving credit where credit is due. I ...

Sucks error code 19. I flashed the BMS first, then the controller, then the dashboard. I also re-wired the harness back to OEM. On a bad flash of the dashboard, I got an error 19 and even after reflashing the dash, it didn't go away. I ended up reflashing the controller as well - then all was well.

I have a G30 not a G30D but I got an error 19 code after flashing the dashboard and even after reflashing it, the error didn't go away. I ended up having to also flash the controller back to factory with a full dump. Then it went away.

Man, I took this thing out today and it's a beast! My M365 couldn't make two hills next to me but this took the first like a champ and the other, while struggling a bit, made it up. I'm heading to a park near me that the M365 would just be able to make it there and back. I'm going to head there and ...

Another possibility is to use POGO pins. Here is an example:

https://www.mill-max.com/products/new/e ... connectors

Now, you just have to match pitch.......

Edit: Got it sorted, however the address table doesnt match whats needed to do the flashing. Can I just flash a DRV1.2.6 bin file from the CFW generator? Flash it first with the full dump, esc126_fulldump.bin, from here: https://files.scooterhacking.org/max/fw/drv/ It might tell you it's read prote...

Ok - I mostly have a Lyft scooter converted to personal. All components are original Lyft parts with the exception of the dash, which I bought from "scooterclone" off ebay: https://www.ebay.com/itm/Segway-Ninebot-Max-G30-OEM-ORIGINAL-AUTHENTIC-Circuit-Board-Replacement-Cover/184087927366 My BMS, Con...