Hello, in this guide I will show you how to unlock the full potential of the stock Ninebot Max. This step is not necessary on the G30P and G30LP scooters, as they're unlocked from the factory. Important info This guide only works on bluetooth-enabled scooters You will need a bluetooth-enabled Window...

My friend has the same problem using a OEM dash, so we have concluded that the problem must be that the wires are incorrectly soldered to the UART interface, right? If that is not the problem, then what is? The pic with the white background has the WRONG wiring (Ninebot's fault), u have to swap the...

F0xMaster, Thank you for all your help. I was able to connect the bms port to a spin Max via this wiring; Red = GND, White = RX, Yellow = TX. Only the firmware for the BMS showed up as BMS134, DRV and BLE was not able to be read. I wanted to see if I would be able to flash anything and was able to ...

HI, So just to be clear. I can theoretically use option 2 on a Lyft SNSC1/2 but still have to rewire the dash cable correct? I have have been digging around for info on this but everyone is focused on the MAX these days. Yes, IAP will work. And yes, you still have to rewire the dash because the IoT...

The easiest way would be to ST-Link the controller, here's a guide:
https://bit.ly/2SaYn4s

the pinout should be the same regardless of scooter version.

If you can connect to the battery using a serial to USB adapter and want to see more details, you can use IAP versions 2.2.1 and higher coz they have this functionality (battery tab).

Any idea if this would work on the Max?

It should work if you have a rental Max or if you use the intermal BMS connector. Please note that some rental companies lock IAP mode. I also don't have a rental max on hand for testing, but other users reported success.

Hello, in this post I will show you how to use IAP with your ES/SNSC scooter. Please note that this guide only applies to the "serial" mode of IAP Required tools & software: A Windows 10 PC IAP is no longer compatible with Windows 8.1 or lower. A CP2102 UART to USB adapter (https://amzn.to/2HRwAAl)...