After programming the ESC with the full dump, you have to read the first address 0x1FFFF7E8-F3 and then copy it to the second address 0x0801C1B4-BF. This prevents the Code 37 error from the beginning.

My understanding is the "D" model - G30D, is a German model? It seems the ESC is different and people programming the non-"D" model ends up bricking their scooter. I've reprogrammed many G30 scooters but I can't do anything with the D model since I'm in the USA and we don't have that here. I've seen...

Do you mean a code 37? There is a step missing in the tutorial on reprogramming the ESC. After programming the ESC with the full dump, you have to read the first address 0x1FFFF7E8-F3 and then copy it to the second address 0x0801C1B4-BF

Probably not. Just get a real dashboard. If you've reprogrammed the BMS and ESC, re-wired the cable - you should be fine.

First a couldn find the file for the esc even thou i loaded all of the things instructeded Don't need the HEX file. Get the full .bin dump here: https://files.scooterhacking.org/max/fw/drv/ Use that file according to the tutorial. Then for the battery: https://files.scooterhacking.org/max/fw/bms/ T...

The UICR is read/dumped like any other address: bin\openocd.exe -f share\openocd\scripts\interface\stlink-v2.cfg -f share\openocd\scripts\target\nrf51.cfg -c init -c "reset halt" -c "dump_image maxble_UICR_backup.bin 0x10001000 0x400" -c reset -c exit The script used to program BLE555 (or modified t...

I figured out the problem. The script used to program BLE555 is missing a programming command and a file. The script should have more at the end, like the program BLE365REC. This is the script in the file: bin\openocd.exe -f share\openocd\scripts\interface\stlink-v2.cfg -f share\openocd\scripts\targ...

I saw your diagram on Discord. I had tried using the TX/RX of the dashboard and the BMS a few weeks ago, which showed data but couldn't get it to program. I modified my cable, adding wires, according to your pinout and finally got it working. Then IAP wanted to do an update and saw the bluetooth tab...

Hi There, I posted this elsewhere with no reply so I'm trying here...... I've been messing around with my G30 and OpenOCD. I've noticed BLE113 from my replacement dashboard that is supposed to be OEM is slightly different than the BLE113 firmware from ScooterHacking. Also, when connecting the Ninebo...

You can flash it again, I bricked mine once too, but power it by itself. Remove it from the scooter. Follow the tutorial from Unicycle Santa

viewtopic.php?f=26&t=266#p1410