ES-200 HANDLEBAR ROD REMOVAL/ADJUSTMENT

tobias
Posts: 1
Joined: Sat May 02, 2020 8:22 pm

ES-200 HANDLEBAR ROD REMOVAL/ADJUSTMENT

Postby tobias Sat May 02, 2020 8:25 pm

Hey there,
i have a ES-200 Scooter with a handlebar that is slightly crooked.

https://i.imgur.com/RWBYX3P.jpg

Unfortunately i haven't found a way yet to adjust this,
i removed the 3 main screws on the clamp (see picture) but trying to move the handlebar rod up fails as it seems stuck.


https://i.imgur.com/64npktE.jpg
Do i have to use more force pulling up?
Or do i have to remove the blind rivet in the picture?

Thanks for any hints!
Best regards
AnteChrist
Posts: 2
Joined: Tue Sep 10, 2019 12:59 pm

Re: ES-200 HANDLEBAR ROD REMOVAL/ADJUSTMENT

Postby AnteChrist Sat Jul 18, 2020 12:25 pm

You have to drill all the way through the rivet, then the neck tube can be moved or removed. Once you have your handlebars lined up, tighten the 3 bolts and use a self tapping sheet metal type screw in place of the rivet. Use a thread lock compound on all the bolts/screws to help hold them in place down the road.

Does the front suspension on those help out at all?

Return to “Okai / Electisan”

Who is online

Users browsing this forum: No registered users and 30 guests