Hello guys,
as title, there is no P3 or P4 options in the secret menu. i even tried the press brake + options trick but to no avail.
I tried using the HX Scooter app to update the firmware, but it appears as the app doesnt recognize the scooter.
My guess is that if i tried to mask the scooter MAC address with a known HX X7 scooter, then i would be able to update the firmware.
another idea i came up with was to use a proxy to intercept and edit the packet sent to the HX server so i can replace the MAC address.
Or patching the app in some way so it always shows the scooter with the correct address.
thanks.
D8:66:C6:09:96:B6 is a known valid X7 Scooter MAC address.
cant unlock speed Cecotec Bongo Serie A
Re: cant unlock speed Cecotec Bongo Serie A
Hii, any progress with the bongo? I may can help I have one and I considerare to unlimit the speed. But you are right, the proxy idea I think should work. Just for brain storming.. maybe is posible to connect the bongo to the PC with android for developer and somehow hack the cecotec's app?
- ClaudeLang
- Posts: 1
- Joined: Wed Dec 06, 2023 1:33 am
Re: cant unlock speed Cecotec Bongo Serie A
Hello,
The HX Scooter App is not updating the firmware for you. You are unable to see the P3 and P4 options in the secret menu of the scooter. You've tried different methods, such as the press brake + button trick, without success.
You mentioned that you could mask the scooter's MAC so it could update its firmware. You suggest that a proxy be used to intercept the packets sent to the server HX and replace the MAC addresses.
You can try the following steps if you need help:
- Check to see if the scooter you have supports P3 or P4 features. There may be limitations in the hardware or software.
- Ask the manufacturer or community forum if there are other ways to update firmware.
- You should be aware of the consequences and risks involved in modifying the data packets that are sent to the server. This could violate the terms and conditions of use, and put your scooter at risk.
Modifying the firmware is a risky process and must be handled with care to prevent damage. I wish you the best of luck in solving your issue.
All the best,
Claude pumpkin panic
The HX Scooter App is not updating the firmware for you. You are unable to see the P3 and P4 options in the secret menu of the scooter. You've tried different methods, such as the press brake + button trick, without success.
You mentioned that you could mask the scooter's MAC so it could update its firmware. You suggest that a proxy be used to intercept the packets sent to the server HX and replace the MAC addresses.
You can try the following steps if you need help:
- Check to see if the scooter you have supports P3 or P4 features. There may be limitations in the hardware or software.
- Ask the manufacturer or community forum if there are other ways to update firmware.
- You should be aware of the consequences and risks involved in modifying the data packets that are sent to the server. This could violate the terms and conditions of use, and put your scooter at risk.
Modifying the firmware is a risky process and must be handled with care to prevent damage. I wish you the best of luck in solving your issue.
All the best,
Claude pumpkin panic
Re: cant unlock speed Cecotec Bongo Serie A
Refer to the user manual that came with your scooter. It should contain information on how to unlock the speed or adjust settings.
A Small World Cup
A Small World Cup
Re: cant unlock speed Cecotec Bongo Serie A
To unlock speeds, you need to register your device with the app. You can do this by following the instructions in the application. mapquest directions
- perfectlyslice
- Posts: 8
- Joined: Mon Jan 09, 2023 2:39 am
Re: cant unlock speed Cecotec Bongo Serie A
I have an E-Twow Booster scooter (also known as UScooter Booster), and I can remove the restriction straight from the scooter's display. Just by pressing buttons. Some scooters have this so-called "sport mode," however it is only recommended for traveling uphill to get additional power.
My scooter's maximum speed is 30 km/h, as specified by the manufacturer. This is also customizable, as I have five levels: 6 km/h, 12 km/h, 20 km/h, 25 km/h, and 30 km/h. But I also have the sport mode, which eliminates any speed limits. This allows me to reach 36 km/h, but it is possible to reach much higher speeds if you are heading downhill.
You'll note that if you have the speed restriction activated, you can't travel faster than the specified speed even if you're heading downhill. This is because the computer slows down the engine when the speed attempts to increase.
basketball stars
My scooter's maximum speed is 30 km/h, as specified by the manufacturer. This is also customizable, as I have five levels: 6 km/h, 12 km/h, 20 km/h, 25 km/h, and 30 km/h. But I also have the sport mode, which eliminates any speed limits. This allows me to reach 36 km/h, but it is possible to reach much higher speeds if you are heading downhill.
You'll note that if you have the speed restriction activated, you can't travel faster than the specified speed even if you're heading downhill. This is because the computer slows down the engine when the speed attempts to increase.
basketball stars
Re: cant unlock speed Cecotec Bongo Serie A
Have you tried using a proxy to intercept and edit packets sent to the HX server and replace the MAC address?
This method is quite feasible. But there is no time to experiment yet capybara clicker
This method is quite feasible. But there is no time to experiment yet capybara clicker
Re: cant unlock speed Cecotec Bongo Serie A
This is a pretty cool Skribbl IO way, I will try it again
Re: cant unlock speed Cecotec Bongo Serie A
The E-Twow Booster (or UScooter Booster) scooter includes a "sport mode" accessible directly through the display, allowing unrestricted speed settings primarily for extra power when going uphill. The scooter has adjustable speed slope limits of 6, 12, 20, 25, and 30 km/h, but in sport mode, it can reach up to 36 km/h, and even faster downhill.
Who is online
Users browsing this forum: No registered users and 22 guests