Bits an Bobs

[Dutchmax]

Size and location used?

[usernameunavailable]

This is my experience for the MAX scoots with the orange downtube; this company is a subsidiary of a large US Automaker.
They are using the Pentagon bolts for just about every publicly-accessible bolt, unsure of size.
Once you're inside, it's either hex/torx (or security hex/torx).

I initially thought they used Penta-Torx which secured the IoT device to the downtube... however, after removal, these were certainly Pentagon bolts.

I was able to get most of the bolts out using my Penta-Torx set.
A word of warning though, don't use a drill/driver to remove these bolts. Use a manual/hand driver as they are quite quick to strip.

I have a Pentagon bit set on order from AliExpress which will likely arrive mid November.