Page 1 of 1

Brake Hall Sensor Error 15

Posted: Tue Feb 11, 2020 11:28 pm
by Razorheart
My Max had Error 15 from the very beginning.
I noticed that the brake wire was very porly adjusted - I hade to pull the brake lever all the way in to activate the brakes.
After adjusting it , the error only appear sporadicly.
When it does I only have to activate the brake handle for it to go away.
It becomes more frequent over time, but a reset procedure seems to make it better for a while.

I suspect that there is no problem with the trottle because the error will appear on cruise control or with me having the trottle on full gas.

Any suggestions?

Re: Brake Hall Sensor Error 15

Posted: Sun Mar 01, 2020 8:56 am
by Arceuid
Hello,

I have the exact same problem (except my wire seems fine), also since the beginning.

I've done some checks by opening the part where the hall sensor is, i wonder if it's just not the magnet being not strong enough, maybe it could be replaced ?
Also since we can now push custom firmwares, maybe we could modify the value expected for the Hall sensor, or even disable it ? I read somewhere we would just lose the blinking light if it's deactivated somehow.

Anyway even if we can bypass the error by sligthly pulling the brake lever it's really annoying because we're losing gas each time the error spawns :/

Re: Brake Hall Sensor Error 15

Posted: Sat Sep 26, 2020 3:35 pm
by Franzi7575
I have the same issue and as soon as I switch on the G30, it beeps and display error 15. Impossible to move.
Has somebody find a solution? I do not know if it is a throttle issue or a brake lever problem or an another thing.
Help needed.
Franzi