A bunch of bricked G30Ds seeking for help
Posted: Fri Feb 21, 2020 7:28 pm
Hey guys,
in a German board currently a few people have bricked their G30Ds by unsuccessfully flashing a custom FW with XiaoFlasher. This was caused by different actions. Someone plugged / unplugged the charging cable while flashing, I for example accidently flashed a M365 FW, someone did everything correct but anyway ended with a bricked scooter.
We all have the same symptoms:
- error 10 flashing on the dashboard
- started after flashing a firmware
- red led on the controller
Since there is no one who did succesfully unbrick his scooter, I just wanted to ask here. Maybe someone here can help some frustrated Germans. :D
When I am connecting with different apps I am getting the following results:
M365 Down: Connected, but no answer from any of the actions.
XiaoFlasher: Connected, but can't get any information and perform any action.
Just as an addition, this is what XiaoFlasher showed me a few days ago BEFORE the brick:
Ninebot-Flasher: Connected, but no option selectable
I don't own a ESx Dashboard, but ordered a new G30 controller and also a ST-Link.
Now I have some questions:
1. Does anyone know if the G30 controller (AliExpress) does work with the G30D scooter? This is what my controller currently does look like. It is different from the version I ordered.
Larg image of controller: click
2. Can I do something with only a ST-Link adapter to save the controller? If yes, where should I sold the three wires?
3. Can I save the controller with the help of the ESx Dashboard?
Btw, I had some problems uploading images here, so I uploaded them via dropbox.
Thanks in advance.
in a German board currently a few people have bricked their G30Ds by unsuccessfully flashing a custom FW with XiaoFlasher. This was caused by different actions. Someone plugged / unplugged the charging cable while flashing, I for example accidently flashed a M365 FW, someone did everything correct but anyway ended with a bricked scooter.
We all have the same symptoms:
- error 10 flashing on the dashboard
- started after flashing a firmware
- red led on the controller
Since there is no one who did succesfully unbrick his scooter, I just wanted to ask here. Maybe someone here can help some frustrated Germans. :D
When I am connecting with different apps I am getting the following results:
M365 Down: Connected, but no answer from any of the actions.
XiaoFlasher: Connected, but can't get any information and perform any action.
Just as an addition, this is what XiaoFlasher showed me a few days ago BEFORE the brick:
Ninebot-Flasher: Connected, but no option selectable
I don't own a ESx Dashboard, but ordered a new G30 controller and also a ST-Link.
Now I have some questions:
1. Does anyone know if the G30 controller (AliExpress) does work with the G30D scooter? This is what my controller currently does look like. It is different from the version I ordered.
Larg image of controller: click
2. Can I do something with only a ST-Link adapter to save the controller? If yes, where should I sold the three wires?
3. Can I save the controller with the help of the ESx Dashboard?
Btw, I had some problems uploading images here, so I uploaded them via dropbox.
Thanks in advance.