ScooterHacking.org

After changing the Ninebot G30LE scooter serial number to letter N with Xiaoflasher, the speed changes to 10 eco, 20 drive and 30 sport? Or only change the speed in sport mode?

Hi, as i recall : 15 on eco, 25 on normal and 30+ on Sport

Ok, thanks my friend.

After changing the letter N. In the second gear Drive, the speed is 20 or 25 km/h?

In the new Ninebot G30LE II in white color (version 2 with gen 2 engine), it is as simple as connecting the scooter via bluetooth to the Xiaoflasher application and it allows you to change any region to the USA. To be able to change the maximum speed to 30km / h, with the correct battery percentage indicator both on the screen and in the official Ninebot application, with its correct original 40km range.
The 3 driving modes would go to 15km / h eco, 25km / h drive and 30km / h sport.

This scooter does not need to be hacked, you just have to change the region by bluetooth with the Xiaoflasher application in the new version Ninebot G30LE II in white color (version 2, with gen 2 engine).

I have the two versions of the Scooter, Ninebot G30E II black (version 2 with gen 1 engine) and G30LE II white (version 2 with gen 2 engine).

Ninebot G30E II (version 2 with gen 1 engine) black, you have to change the new Gen 2 engine and hack it with the Scooter Hacking mobile application creating and loading a custom rom (from the mobile).

Ninebot G30LE II white (version 2 with gen 2 engine), you have to connect it by bluetooth to the Xiaoflasher application and change the region to the USA to change the speed to 30km / h, with the range indicator on the screen and the application Correct Ninebot.

As simple as that.

i have tried this with ninebot flasher but it keeps beeping three times and doesnt save the new serial number..

im desperate

Thank you, i just changed a that one letter,... and it works!
Cruise Control ON and speed around 33km/h with GEN2 motor, and correct distance with full battery in Ninebot app.

I finally have discovered how to hack G30LE/G30LD, setting the max speed to 30 km/h and without screwing up the range indicator.

This method is the safer I've found, it consists of changing only one letter in serial. My letter A became N, letting the firmware think my Ninebot is a G30LP model.

I have followed this:

• Start XiaoFlasher and connect to your scooter
• Take note of the original serial, mine was N4GAD2040K****. Do not lost it! This is unique and it should be restored for warranty reasons
• Click "CHANGE REGION" button and select "Custom serial"
• Set N4GND2040K**** as your new serial.
• Reboot the Ninebot... and TaaaDaaan: speed limit is now 30 km/h and the cruise control appeared again even with the latest firmware

Do this procedure at your own risk,
Drive safe and don't forget to obey the laws!

Range indicator OK:


33km/h on free wheel:

N4GAD hack speed, serial N4GAD is a utility for Android devices. It allows you to quickly change the network settings of the device. This tool works on all devices running Android 4.0 (Ice Cream Sandwich) or later.
1v1 lol

A.K.A "Hacking on speed" or "speed hackering" is the act of attempting to gain unauthorized access to a computer system as quickly as possible. The purpose of hacking is typically to gain unauthorized access to sensitive data, such as passwords or personal information, in order to compromise security and exploit such data for financial benefit or malicious purposes.
octordle nerdle

If someone has a solution to change region on this g30 le II with this parameters.

Ble 1.1.7
Drv 1.8.3
Bms 1.5.8
Serial number n4gad......
Region eu - g30le

If anyone can change region on this g30 le II with these specifications.
word finder