[UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Posts: 3
Joined: Fri Aug 20, 2021 8:39 am

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby tanidani Tue Aug 24, 2021 1:47 pm

I have 2 years now a ES4.

The internal battery created problems and I open to create a new battery.
Now the internal battery is without BMS.
I created a new Custom Firmware from https://esx.cfw.sh/classic using the ES4 1.5.1 with the StealthMode activated, just to not check for BMS.
After flashing, with the ESx firmware code: sjvpfguhd2 I have 2 problems:
1.- I canot flash BLE. I canot return to original DRV or BLE.
2.- I dont have speed. I press the acceleraton and nothing. I move manual the scooter and the DashBoard show the speed. NO any allarm or error.
I read here that I must change Serial Number. I changed from the original N2LBH1842C0016 to N2GSD1111C0016 but nothing happend.

Any suggestions ???

Thanks in advance,

Posts: 3
Joined: Tue Mar 15, 2022 9:15 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby fn.sfl Tue May 10, 2022 6:50 pm

Based on Method 3, how do we know which file to download from the several files displayed? My scooter is a Ninebot Max
Posts: 3
Joined: Mon Aug 01, 2022 8:20 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby mccasian Thu Aug 04, 2022 5:23 pm

I see that the SHU app can send custom commands to the scooter. It would be nice if someone can post the list of commands that can be sent(of course if it's just so simple).

I am interested to send some commands from another device(arduino board or raspi zero) in order to change the region back to original in case if police stop me for control. I have an iphone, I can't keep a second phone all time with me in order to change it quick in case if.
Posts: 4
Joined: Tue Sep 06, 2022 11:33 am

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby Maraudervz Fri Oct 07, 2022 5:02 pm

Is there a way to change the Battery serial number?
I find on the forum but not found.
Posts: 1
Joined: Fri Aug 18, 2023 2:03 pm

Re: [NEW] HOW TO : Activate a new controller / change serial number

Postby Juliett78 Sun Aug 20, 2023 4:24 am

I'm not sure if its appropriate to post the following but it helped me a lot so I figured I would share. Based on other research I found for changing serials with the ninebot ONE and other models...I was able to get a new control board activated with ALL the features. The chinese clone board I had purchased was ALREADY activated but it was with a serial for a model that did NOT have "Disco light" control, so that option was missing in my app. However it had mode switching (eco, normal, red S Sport). Changing the serial to the original Bird serial number gave me the Disco Lights back, but removed mode switching.

So going by this picture:
Serial Breakdown.PNG
I was able to change the 4th digit from the E that the clone board had (or the R the bird serial has) to a T, which gave me both Mode switching and disco lights, and also put the picture of a ninebot scooter in my app when connected (no pic comes up when its a bird controller)
Hi guys
Sharing experiences like these can be incredibly helpful to the community. It's fascinating how tweaking the serial number can affect the features on the control board. Your story sheds light on the complexities of these devices and how small changes can lead to different functionalities.Nickname
Posts: 1
Joined: Mon Nov 20, 2023 10:07 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby m1ckys_23 Mon Nov 20, 2023 10:09 pm

is on the file list the firmware for ninebot f2 pro e?

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 5 guests