Page 1 of 2

Ultimate error codes diagnostics topic

Posted: Mon Sep 02, 2019 11:37 pm
by Lothean
Rather than making a new topic for each error code or for each issue, let's centralize all of them here

Error codes : https://wiki.scooterhacking.org/doku.ph ... errorcodes

Please, post all of your issues below. New topics about error codes will be moved here.

Specific error codes that deserve a topic of their own:
Error 10

Re: Second battery error 42

Posted: Fri Sep 20, 2019 6:30 am
by MACPICKLE
Hi,
Thanks for your detailed guide How to flash...worked for me.
Now, If I connect second battery, get error 42. So scooter is still unusable for me, dont have enought power to enjoy the ride.
Hope that sobebody knows how to solve this error and will share the solution here.
Thanks!

did you ever figured it out ?

Ninebot ES2 with external battery died.

Posted: Wed Sep 25, 2019 1:53 am
by Toasty420
I was driving up a hill yesterday when suddenly my segway es2 stops and shows me an error 18. I let it rest a bit to try again but it still showed the error, so i started to drive home down the hill without turning it on. After driving down for a while it turned on by itself, showed me an error 10 and turned off again. Now i cant even turn it on anymore, the only way to see something on the display is by holding down the power button, as soon as i let it go it turns off. What should i do?
I bought the scooter in July and I've been using it almost daily without issues.

Ninebot ES2 beeps and backlights flashing

Posted: Tue Oct 15, 2019 7:05 pm
by remove
Hi!
I flashed my scooter with that guide. All went well. When i connect my dashboard to the scooter its starts to beep and backlights are flashing and showing a red symbol of a tool on dash. What have happend?
Its say in app: Throttle hall sensor error, please check throttle handle, dashboard and related cable(14)

Re: Ninebot ES2 beeps and backlights flashing

Posted: Tue Oct 15, 2019 7:52 pm
by Deaofly
Error 14 is related to the acceleration throttle. Make sure your handlebar grip is not pushed up against the throttle. Move the throttle up and down to make sure it's not sticking. If you took apart the scooter the there might be a issue with the throttle connector not being plugged in all the way. That's probably the best help I can get. Best of luck.

Re: Ninebot ES2 beeps and backlights flashing

Posted: Tue Oct 15, 2019 9:39 pm
by remove
Thanks man its was not fully connected. Wow thanks man! Had some panic there.

Re: Ninebot ES2 beeps and backlights flashing

Posted: Wed Oct 16, 2019 5:06 am
by Deaofly
Awesome, glad I could help in a timely manner

Re: Ninebot ES2 with external battery died.

Posted: Wed Oct 16, 2019 5:16 am
by UgloBuglo
I was driving up a hill yesterday when suddenly my segway es2 stops and shows me an error 18. I let it rest a bit to try again but it still showed the error, so i started to drive home down the hill without turning it on. After driving down for a while it turned on by itself, showed me an error 10 and turned off again. Now i cant even turn it on anymore, the only way to see something on the display is by holding down the power button, as soon as i let it go it turns off. What should i do?
I bought the scooter in July and I've been using it almost daily without issues.
If you bought it as late as July, then just go back to the store and have it replaced/repaired under guarantee.

Re: Ultimate error codes diagnostics topic

Posted: Fri Nov 01, 2019 2:22 am
by Mazzamotorsport
HI FRIENDS, I BOUGHT A NEW EXTERNAL BATTERY, AND THE DASHBOARD SHOWS A 50 ERROR CODE, I SEE THAT IS THE EXTAERNAL BMS, WHAT CAN I DO? THANKS.

Re: Ultimate error codes diagnostics topic

Posted: Wed Nov 06, 2019 1:02 am
by Scooterman
How do I fix error 21