ScooterHacking.org

So I am running main FW (via Seguay app) V0.5.3.3, and BMS, eBMS version 0.3.0. I've read some threads suggesting moving to 1.4.1. I DL'd BMS141.bin.enc, Ninebot-Flasher (win10), it looks like it's updating (1%...2%... ...100%), but then the Seguay app sitll shows 0.3.0. I've seen lots of incomplete or unclear threads - I'd appreciate some assistance!

I've got no error codes, so don't want to start getting em (some have said this introduces them(?)...

I'd also like to upgrade the speed - but that's another topic

Thanks!

looks like the dashboard is not a real oem one

Non-OEM dashboards only charge to 80%?

How do I tell what my control board is - I can open it up, but don't know the different boards available...

Non-OEM dashboards only charge to 80%?

I meant that with a non OEM dashboard you cant update the external bms but with a real one you will have no issues
That happened to mine ordered a dash online thinking it was OEM one and wouldn't let me update got stuck or wouldn't start
Until a friend lent me his real oem dash had no problems and updated just fine

I meant that with a non OEM dashboard you cant update the external bms but with a real one you will have no issues
That happened to mine ordered a dash online thinking it was OEM one and wouldn't let me update got stuck or wouldn't start
Until a friend lent me his real oem dash had no problems and updated just fine

Not completely true!
I had to use an old version (1.0 I believe) of "ES RollBack" to go from external BMS 3.0.1 to 1.3.6, then I was able to upgrade from that to 1.4.1 through the normal Ninebot App. Current version of ES RollBack was not able to update the eBMS.

OEM dashboard, not a clone.