[UPDATED] Activate a new controller / change serial number (BLE, ST Link)

User avatar
Lothean
Site Admin
Posts: 132
Joined: Fri Mar 15, 2019 2:40 am
Location: France
Contact:

Re: [NEW] HOW TO : Activate a new controller / change serial number

Postby Lothean Tue Apr 23, 2019 1:49 am

I'm not sure if its appropriate to post the following but it helped me a lot so I figured I would share. Based on other research I found for changing serials with the ninebot ONE and other models...I was able to get a new control board activated with ALL the features. The chinese clone board I had purchased was ALREADY activated but it was with a serial for a model that did NOT have "Disco light" control, so that option was missing in my app. However it had mode switching (eco, normal, red S Sport). Changing the serial to the original Bird serial number gave me the Disco Lights back, but removed mode switching.

So going by this picture:
Serial Breakdown.PNG
I was able to change the 4th digit from the E that the clone board had (or the R the bird serial has) to a T, which gave me both Mode switching and disco lights, and also put the picture of a ninebot scooter in my app when connected (no pic comes up when its a bird controller)
Very nice pieces of information, thanks for sharing!
Scooturd
Posts: 15
Joined: Wed Apr 24, 2019 7:22 pm

Re: HOW TO : Activate a new controller / change serial number

Postby Scooturd Sun Apr 28, 2019 9:52 pm

Any way to bring this to Android
User avatar
Lothean
Site Admin
Posts: 132
Joined: Fri Mar 15, 2019 2:40 am
Location: France
Contact:

Re: HOW TO : Activate a new controller / change serial number

Postby Lothean Mon Apr 29, 2019 1:49 pm

Any way to bring this to Android
It should come. Wait for a week or two, I guess ;)
lklunder
Posts: 1
Joined: Sun May 12, 2019 8:20 am

Re: HOW TO : Activate a new controller / change serial number

Postby lklunder Sun May 12, 2019 8:43 am

Hello Lothean,
Thanks for this info works fine, but after downgrade DVR version, the bottom lights no works anymore with Segway-Ninebot app, even using "T" as fourth character serial number, do you know why happens this ???........my another question is, how I can a backup of actual firmware version installed on my ES2 (9.5.0 DVR version) before install 1.3.3 version .....and at finish procedure I can to back to 9.5.0 ......It's possible do it ????.
Thanks in advance.
Dzidek2005
Posts: 11
Joined: Fri May 24, 2019 10:10 am

Re: HOW TO : Activate a new controller / change serial number

Postby Dzidek2005 Fri May 24, 2019 10:17 am

A purely theoretical question. On the subject of BMS programmings it possible to change the serial number of both batteries with a similar method as the motherboard or in some other way.
Alternatively, if you can write a different battery capacity to bms, it would be useful to use some kind of tool to help increase the number of cells, but so that bms can see this capacity
Last edited by Dzidek2005 on Sat Jun 01, 2019 2:48 am, edited 3 times in total.
gh0st
Posts: 1
Joined: Sun May 26, 2019 9:52 pm

Re: HOW TO : Activate a new controller / change serial number

Postby gh0st Sun May 26, 2019 9:52 pm

Where can i find a new serial number? - or how can i generate it
Dzidek2005
Posts: 11
Joined: Fri May 24, 2019 10:10 am

Re: HOW TO : Activate a new controller / change serial number

Postby Dzidek2005 Tue May 28, 2019 11:39 pm

Enter your old serial number exactly as you had it. How to change it you have described in the guide.
Last edited by Dzidek2005 on Sat Jun 01, 2019 2:41 am, edited 1 time in total.
jacknab
Posts: 8
Joined: Fri May 31, 2019 7:10 am

Re: HOW TO : Activate a new controller / change serial number

Postby jacknab Fri May 31, 2019 7:13 am

hi could you post a link of the board you purchased?
Camper Joe
Posts: 4
Joined: Sat Jun 08, 2019 6:33 pm

Re: HOW TO : Activate a new controller / change serial number

Postby Camper Joe Sat Jun 08, 2019 6:44 pm

Hi guys

I can't connect with the ninebot flasher to my scooter. IIf I press connect the ninebot flasher program crashes.
Any ideas?
Barrybritt
Posts: 3
Joined: Sat Jun 08, 2019 2:07 am

Re: HOW TO : Activate a new controller / change serial number

Postby Barrybritt Wed Jun 12, 2019 12:34 pm

Any help? I followed the steps but got stuck with this error

hex convert exception arg_argumentOutOfRangeException
arg_paramname_name,argumentOutOfRange_IndexLength

Return to “Ninebot ES”

Who is online

Users browsing this forum: No registered users and 9 guests