[UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Dzemox
Posts: 1
Joined: Sun Aug 11, 2019 2:40 pm

Re: HOW TO : Activate a new controller / change serial number

Postby Dzemox Sun Aug 11, 2019 2:42 pm

Hi,

The Ninebot-Flasher dont't connect to my scooter. It is shown, «IsPaired:False, IsConnected:False, IsConnectable:True». But nothing happens when I click «connect», there's no error message - simply nothing at all. Android tools like ESDownG works fine... Is it possible to check some app logs or something?
Hello,
someone can help ?
I have the same problem :/
yagomango
Posts: 3
Joined: Mon Aug 19, 2019 12:09 am

Re: HOW TO : Activate a new controller / change serial number

Postby yagomango Mon Aug 19, 2019 10:44 am

Had the same problem.
I just re and disconnected a few times and then it worked.
However I can't guarantee it'll work.
sharpfoam
Posts: 1
Joined: Thu Sep 12, 2019 5:55 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby sharpfoam Thu Sep 12, 2019 5:57 pm

How do I change the eBMS serial number? in the latest version of Ninebot flasher I can't find those buttons anymore.
fivefingerdiscount
Posts: 14
Joined: Sun Jul 28, 2019 2:20 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby fivefingerdiscount Fri Sep 13, 2019 2:10 am

Nice write up and thanks for the updates. I like the hex edit one because doing it all in one shot on same computer instead going out to find and buy a window 10 device . Before this updated EDU i edited all the serials in the bin file so I’m not sure that’s what’s causing my Bluetooth to goes out. I even swap the dash. Edit: I tried other iPhone and it find my scooter right away. So I guess the scooter software is glitchy. If u close the app while connecting to it, it’s later will forgot your phone and never let it connect again until different phone connected to it and power off from the scooter in order to connect to it again. Hopefully new software will fix it
Last edited by fivefingerdiscount on Fri Sep 13, 2019 4:27 pm, edited 1 time in total.
michachael
Posts: 28
Joined: Tue Jul 23, 2019 3:31 pm

Re: HOW TO : Activate a new controller / change serial number

Postby michachael Fri Sep 13, 2019 7:52 am

Had the same problem.
I just re and disconnected a few times and then it worked.
However I can't guarantee it'll work.

I know how to solve this, as I had similar issue. I hope an admin can add this to the FAQ guide of Ninebot Flasher.

Here are the steps:
1. make sure your smartphone's bluetooth is off, so it cannot connect automatically with the scooter
2. turn on the scooter, you will normally see the bluetooth light flashing - This means it's searching to connect
3. open the ninebot flasher in windows (make sure your computer's bluetooth is on)*
4. press Start Scan
5. IMPORTANT: once you have found your scooter, press Stop Scan => I didn't do this step before, and I almost always failed to connect.
6. press Connect
7. Done


*if you don't have windows but mac, you can install Bootcamp from the official apple website, so you can install windows home 10 for free on your mac, next to your existing MacOS. This works. I do it like this.
michachael
Posts: 28
Joined: Tue Jul 23, 2019 3:31 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby michachael Fri Sep 13, 2019 10:15 am

Do I need to change the BMS SN too, in order to get the speed I want? I flashed the custom firmware on the generator website scooterhacking, and also flashed the BMS and external BMS with the files on https://files.scooterhacking.org/esx/fw/bms/

thank you
fivefingerdiscount
Posts: 14
Joined: Sun Jul 28, 2019 2:20 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby fivefingerdiscount Fri Sep 13, 2019 4:33 pm

Do I need to change the BMS SN too, in order to get the speed I want? I flashed the custom firmware on the generator website scooterhacking, and also flashed the BMS and external BMS with the files on https://files.scooterhacking.org/esx/fw/bms/

thank you
I’m a newbie and only converted one scooter. I think all u need is to flash it with CFW In sport settings or adjust the speed setting. In my experience I flashed it in all settings and it’s still only goes up to 17mph. Maybe because I only have about 25% on my battery idk. But if I do a a factory software update then it would only go up to 12mph.
silvera7
Posts: 7
Joined: Sun Aug 25, 2019 6:38 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby silvera7 Tue Sep 24, 2019 3:11 am

Estimados

Soy novato en este tema tengo un SNSC y quiero cambiar el numero de serie para activar la opcion de luces

Como cargo el archivo editado en el metodo 2 ?
User avatar
UgloBuglo
Posts: 23
Joined: Sat Jul 13, 2019 9:40 pm
Location: Sweden

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby UgloBuglo Tue Sep 24, 2019 9:58 am

Estimados

Soy novato en este tema tengo un SNSC y quiero cambiar el numero de serie para activar la opcion de luces

Como cargo el archivo editado en el metodo 2 ?
English please!

Anyway, you just flash the fulldump the usual way, with STLink or RPi. there are very comprehnsive instructions in this very forum.

I can see you have asked the same question about disco lights several times, are you even sure you have the LED's installed? They are not usually installed in an SNSC.
silvera7
Posts: 7
Joined: Sun Aug 25, 2019 6:38 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby silvera7 Tue Sep 24, 2019 11:52 pm

Estimados

Soy novato en este tema tengo un SNSC y quiero cambiar el numero de serie para activar la opcion de luces

Como cargo el archivo editado en el metodo 2 ?
English please!

Anyway, you just flash the fulldump the usual way, with STLink or RPi. there are very comprehnsive instructions in this very forum.

I can see you have asked the same question about disco lights several times, are you even sure you have the LED's installed? They are not usually installed in an SNSC.

Hello
Thanks for the answer UgloBuglo, I did a check of the LEDs and they are rgb in the application I do not see the option, it would be good to create a post and comment that it is the BMS, BLE, ESC and what is its function

I don't know if I'm missing any meaning or maybe this is somewhere in the forum I didn't find it

Thank you

Return to “Ninebot ES”

Who is online

Users browsing this forum: MSN [Bot] and 21 guests