ScooterHacking.org

Heya,

i've got a Ninebot ES2 that i've had for a couple weeks now (flashed ex-rental).

Yesterday while i was riding it, the throttle just stopped working. No thrust at all.
Everything else works as previously, even the e-brake.

I suspected the motor first but the e-brake wouldn't work then would it?

Do you think it could just be the throttle and that i should get it replaced?

Thanks

Try turning the scooter off, holding the throttle, and while continuing to hold the throttle, turn the scooter on.

Do you get an Error 14?

If No, you probably have a bad throttle, or bad connection to the throttle. Check the small throttle cable near the dashboard.
If Yes, and the scooter still doesn't accelerate, I'm sort of at a loss. Try re-flashing?

Try turning the scooter off, holding the throttle, and while continuing to hold the throttle, turn the scooter on.

Do you get an Error 14?

If No, you probably have a bad throttle, or bad connection to the throttle. Check the small throttle cable near the dashboard.
If Yes, and the scooter still doesn't accelerate, I'm sort of at a loss. Try re-flashing?

There's no difference really, i don't get an errormessage.
I'll try and replace the throttle to begin with. Thanks.