Not having found a tutorial for the removal of the rear tires I make one after having removed mine.
The procedure is quite simple, the tire is only force-fitted on the rim. To remove it you will need:
- 2 large flathead screwdrivers
- A crowbar
To start, run your two screwdrivers between the rim and the tire.
Turn one of the two screwdrivers on itself, it should stick to the tire and allow it to move away from the first one.
Then tilt the two screwdrivers towards the inside of the rim.
Once a space has been created, all that remains is to pass the crowbar between the rim and the tire to finish removing it.