Segway ninebot es4 problem

jojo83
Posts: 3
Joined: Tue Apr 23, 2019 8:15 pm

Segway ninebot es4 problem

Postby jojo83 Mon Apr 29, 2019 7:03 am

Hi guys thanks for this forum
I have es4 and had so many problems before i couldn't change the speed mode with double click so i decided to change the circuit board and the control board ....
So I changed my control board and the circuit board now my speed is 30mph it was 17mph before ... and mow experiencing some problem now when i turn the night led on the speed goes down to 13 mph when i turn it of it goes back to 30mph
Please help
mihan65
Posts: 17
Joined: Fri Apr 05, 2019 9:57 am

Re: Segway ninebot es4 problem

Postby mihan65 Mon Apr 29, 2019 1:17 pm

Hi guys thanks for this forum
I have es4 and had so many problems before i couldn't change the speed mode with double click so i decided to change the circuit board and the control board ....
So I changed my control board and the circuit board now my speed is 30mph it was 17mph before ... and mow experiencing some problem now when i turn the night led on the speed goes down to 13 mph when i turn it of it goes back to 30mph
Please help
this is the method:
Image

dont forget to resolder this smd to "smd 0603"
Image
if you solder the old smd over (without replacing to the 0603 and putting a resistor to the led), it will work, but will damage the scooter dc-dc after a couple of weeks/months and ur max speed will be not more than 18kmh
jojo83
Posts: 3
Joined: Tue Apr 23, 2019 8:15 pm

Re: Segway ninebot es4 problem

Postby jojo83 Mon Apr 29, 2019 3:10 pm

Thank you for the post so do i need to solder or to take out the resistor i took it out completley without soldering on it so basically the resistor place is empty .. does it work like that ??
mihan65
Posts: 17
Joined: Fri Apr 05, 2019 9:57 am

Re: Segway ninebot es4 problem

Postby mihan65 Tue Apr 30, 2019 8:10 am

Thank you for the post so do i need to solder or to take out the resistor i took it out completley without soldering on it so basically the resistor place is empty .. does it work like that ??
solder the 0603 smd
wielandgeorg
Posts: 17
Joined: Wed Jun 12, 2019 7:32 pm

Re: Segway ninebot es4 problem

Postby wielandgeorg Sun Jul 07, 2019 4:28 am

30 mph? every time I get to 21mph it brakes and doesnt go past that. How did you get it to go 30?

you can also just put a 33 ohm 1/4watt resistor between negative wire of the headlight and it should solve it

cheers

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 52 guests