Page 1 of 1
Segway ninebot es4 problem
Posted: Mon Apr 29, 2019 7:03 am
by jojo83
Hi guys thanks for this forum
I have es4 and had so many problems before i couldn't change the speed mode with double click so i decided to change the circuit board and the control board ....
So I changed my control board and the circuit board now my speed is 30mph it was 17mph before ... and mow experiencing some problem now when i turn the night led on the speed goes down to 13 mph when i turn it of it goes back to 30mph
Please help
Re: Segway ninebot es4 problem
Posted: Mon Apr 29, 2019 1:17 pm
by mihan65
Hi guys thanks for this forum
I have es4 and had so many problems before i couldn't change the speed mode with double click so i decided to change the circuit board and the control board ....
So I changed my control board and the circuit board now my speed is 30mph it was 17mph before ... and mow experiencing some problem now when i turn the night led on the speed goes down to 13 mph when i turn it of it goes back to 30mph
Please help
this is the method:
dont forget to resolder this smd to "smd 0603"
if you solder the old smd over (without replacing to the 0603 and putting a resistor to the led), it will work, but will damage the scooter dc-dc after a couple of weeks/months and ur max speed will be not more than 18kmh
Re: Segway ninebot es4 problem
Posted: Mon Apr 29, 2019 3:10 pm
by jojo83
Thank you for the post so do i need to solder or to take out the resistor i took it out completley without soldering on it so basically the resistor place is empty .. does it work like that ??
Re: Segway ninebot es4 problem
Posted: Tue Apr 30, 2019 8:10 am
by mihan65
Thank you for the post so do i need to solder or to take out the resistor i took it out completley without soldering on it so basically the resistor place is empty .. does it work like that ??
solder the 0603 smd
Re: Segway ninebot es4 problem
Posted: Sun Jul 07, 2019 4:28 am
by wielandgeorg
30 mph? every time I get to 21mph it brakes and doesnt go past that. How did you get it to go 30?
you can also just put a 33 ohm 1/4watt resistor between negative wire of the headlight and it should solve it
cheers