ScooterHacking.org

I'm sorry if I'm bothering but I just want to do it right...


Is there anything that stops me from changing it to the setting so I can drive in 28 km/h?

Added so you can see what the software says

(Ok I realized I couldn't post any photos I'm sorry) but the info from the android app ScooterHacking Utility says:

Model: Ninebot E25D
BLE: 2.1.3
DRV: STMF32 | 2.6.1.13
BMS: 1.6.0
ESC Region: E25D (20km/h)
Error code: None all ok

I ask again: Is there anything that stops me from changing it to the setting so I can drive in 28 km/h? I mean the region of course.

Yes your latest firmware (2.6.1.13) means the Scooter is unhackable and you have to wait for some info here on when a hack becomes available.

For now, enjoy the go slow :)

Hi! I accidentally updated the scooter's firmware from the box and now my firmware is DRV 2.7.2. I could not downgrade it using ScooterHacking Utility, it gives me a "data format error" when I am choosing a DRV 2.7.1. Is there any chance that in the future it will be possible to downgrade and unlock it?
Model: Ninebot E45D
BLE: 2.1.3
DRV: 2.7.2
BMS: 1.6.0
ESC Region: Poland E45D (20km/h)
Error code: Data format error

Hi. I have the Ninebot E45d is locked to 20km. Current information from Ninebotflasher looks this:
BSM Ver.1.6.0
BLE Ver. 2.1.3
DRV Ver. 2.6.15
When i try change region with the app I see on the screan error. After read this all post I understand I need flash the dashboar using STLink. Which files I should use to do this firmware.scooterhacking.org/e/ ?

Thank You.

Hi. I have the Ninebot E45d is locked to 20km. Current information from Ninebotflasher looks this:
BSM Ver.1.6.0
BLE Ver. 2.1.3
DRV Ver. 2.6.15
When i try change region with the app I see on the screan error. After read this all post I understand I need flash the dashboar using STLink. Which files I should use to do this firmware.scooterhacking.org/e/ ?

Thank You.

can you send a link to a step by step tutorial on how to flash an E45D with ST-LINK?

Hi! I accidentally updated the scooter's firmware from the box and now my firmware is DRV 2.7.2. I could not downgrade it using ScooterHacking Utility, it gives me a "data format error" when I am choosing a DRV 2.7.1. Is there any chance that in the future it will be possible to downgrade and unlock it?
Model: Ninebot E45D
BLE: 2.1.3
DRV: 2.7.2
BMS: 1.6.0
ESC Region: Poland E45D (20km/h)
Error code: Data format error

Hello, did you solve your problem?
I have the same model and also I can't do anything with the speed, max is 20km/h

Hello.
I have Ninebot E22 with BLE 2.1.3, DRV 2.7.2, BMS 1.6.0 and max speed 20kmh. I tried to increase max speed to 25kmp by XiaoFlasher. I selected German Maneuver. After this SN of my Ninebot changed (from N2GD… to N2GR…) and model changed too (from E22 to E45D). But the terrible thing is that cruise control is no longer available. Any attempt to downgrade leads to Data format error. How can I change SN to origin (N2GD…)? Can I to reset my Ninebot?

Im having the same issue with my E22.. stock to 20kph speed.. hope someone could share their solutions. Thanks

My e45 was locked at 13mph from upgrading to the newest firmware using the ninebot app (bad idea) and changing the region with another app.

I was able to downgrade by using the st link and the scooterhacking windows app(follow the stlink instructions), then used the scooterhacking android app to upgrade to drv 5.5

Hello, new to the group. I dunno if belongs here but i get 34 km/h if the front tyre is up in the air in eco-mode. And if i drive in nice surface and no wind in my face it goes 30-32 km/h. And thats eco-mode. I have to start with sport mode to the 20 km/h after that i press the button twice to change eco-mode at speed and it goes to up to 30/32 km/h. But in level ground and no wind ,🤣. I have e25d.