Ambitious battery mod in need of a battery helpdesk

cir
Posts: 1
Joined: Mon Jul 29, 2019 10:37 am

Re: Ambitious battery mod in need of a battery helpdesk

Postby cir Mon Jul 29, 2019 11:00 am

Yes I agree 55 km / h I think that would give even more but esmax free software limits more than 55 Ikm I think that you can have other versions of the software on the external and internal battery and do not communicate with the controller eat the software esrolback tool to bms 1.22 firmware too to 1.22 then doing updates updraguje you external batteries do it only when soft is also lower in the external battery on the bank is old bms eg 1.3.6 or 1.22 is written by Google translator so not everything can be a super legible esrolback application check all modloly scooters and software version and other useful things you can find at https://mimod.ru/en_US/

Everything zelezy since mosfet what you have are on 64 85 I 100 v theoretically having the last you can give on the engine and 90 v conference needs someone who will tell me how to remove the speed limits from the software are discounted, but they are actually set at 45km / h above 50 km
https://imageshack.com/i/poUg45Ujj
https://imageshack.com/i/poqfxUdaj
https://imageshack.com/i/plcNPIw0j

I gave, of course, bigger capacitors 1000 nf 63v can be without them but thanks to the capacitors we have a voltage supply. Larger voltage gives a smaller A on the connectors from what I calculated instead of 25 A as in the original we have at power 1000W only 16A on the cables if you want to give more V you need to increase capacitors on 85 or 100v but reduce the capacity so that they fit into the housing
That hardware mod is only for internal battery, right? Are you using only internal battery with increased voltage or external as well? How do you increase voltage on external battery?

Same in Polish below:
____________________________
Ta przeróbka jest dla wewnętrznej baterii, prawda? Jeździsz tylko na samej wewnętrznej i dołożonej 4s4p aby podnieść napięcie czy masz też zewnętrzną beterię podpiętą? Nie mogę do Ciebie napisać wiadmości prywatnej - możesz spróbować do mnie napisać?
lifestyle17
Posts: 4
Joined: Wed Aug 28, 2019 10:47 pm

Re: Ambitious battery mod in need of a battery helpdesk

Postby lifestyle17 Wed Aug 28, 2019 11:28 pm

And you have software that abolishes the speed limit, because the maximum I achieved is 53 km / h at 84v .. Thank you.
lifestyle17
Posts: 4
Joined: Wed Aug 28, 2019 10:47 pm

Re: Ambitious battery mod in need of a battery helpdesk

Postby lifestyle17 Fri Aug 30, 2019 5:57 am

Hello, my weight is 87 kg. 8-) the capacitors I used are 2x 1000uF / 100v, it works stable.
bms 1.3.3. It accelerates correctly reaches 53km and there is a blockade.
an additional package is 4s4p but wants to expand to 5s4p. greater power reserve. If I can ask for help with your modification I will be grateful. ! ;)
lifestyle17
Posts: 4
Joined: Wed Aug 28, 2019 10:47 pm

Re: Ambitious battery mod in need of a battery helpdesk

Postby lifestyle17 Tue Sep 03, 2019 10:42 pm

I connected for a 10s2p test which did not give a higher speed. now I have 4p4s which is 52km / h. I can send you photos when I installed 1000uf 100v capacitors. are you able to give me your cfw for the test?
User avatar
Lothean
Site Admin
Posts: 138
Joined: Fri Mar 15, 2019 2:40 am
Location: France
Contact:

Re: Ambitious battery mod in need of a battery helpdesk

Postby Lothean Fri Sep 06, 2019 7:17 am

Please translate any non-English language immediately. (you can keep original message) If you want a local board; just ask. This is an international board. I will remove all non-compliant messages in two weeks from now.

Return to “Ninebot ES”

Who is online

Users browsing this forum: No registered users and 2 guests