Recommended supplier for ESx control board and LED ground effect strip

CDogg
Posts: 79
Joined: Tue Sep 03, 2019 7:08 am

Re: Recommended supplier for ESx control board and LED ground effect strip

Postby CDogg Sat Jan 13, 2024 9:57 pm

So, it seems there's some confusion about the underglow LEDs on the ES1-4 and making them work either after the scooter has had some work done, or the settings have been modified via cfw.

So, here's all you need to know about ensuring they are working properly on your scooter.

If you have made some recent changes to your settings or have installed a new controller and want to reactivate the LED's, change blink patterns, or colors, use your phone and download m365 Tools or Darknessbot (for iPhone) and connect your scooter via bluetooth. Then, use the LED control panel to turn them back on by selecting some blink pattern and color combo. If your LEDS are connected properly, the brake lights will always work (except for early ES3 models), which should indicate whether or not your LEDs will or won't work. So if you have working brake lights, then getting your underglow LEDs will be a cinch.

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 42 guests