Battery voltage limit < 43.01 not allowed / bad idea?
Posted: Wed Sep 04, 2019 11:45 am
Hi,
I have a Xiaomi M365 Pro and would like to possibly prolong its battery live (I mean the life of the battery before going dead as such, not the capacity/range per charge). Li-Ion cells can live longer if they are not 100% charged. And I won't use the battery maximum capacity anyway in my daily use.
So I thought I would lower the settings at "Battery voltage limit" a bit lower than its default value which is 43.01
But both the Pro and the none-Pro firmware toolkits won't let you pach to lower settings. Only higher settings for battery upgrates are allowed.
Is it a bad idea to lower the Battery voltage limit value for the charging process to stop at 90% capacity? Or woult this prevent the BMS for balacing out the cell voltages at the end of charging?
Thanks
I have a Xiaomi M365 Pro and would like to possibly prolong its battery live (I mean the life of the battery before going dead as such, not the capacity/range per charge). Li-Ion cells can live longer if they are not 100% charged. And I won't use the battery maximum capacity anyway in my daily use.
So I thought I would lower the settings at "Battery voltage limit" a bit lower than its default value which is 43.01
But both the Pro and the none-Pro firmware toolkits won't let you pach to lower settings. Only higher settings for battery upgrates are allowed.
Is it a bad idea to lower the Battery voltage limit value for the charging process to stop at 90% capacity? Or woult this prevent the BMS for balacing out the cell voltages at the end of charging?
Thanks