Speed downgrade. Yes, downgrade.
Posted: Mon Apr 18, 2022 3:00 pm
Right, so this might not be a frequent issue, but I can't find any other posts anywhere that address this so I thought someone here could help me out.
So...
I bought my M365 Pro in 2019, right before the law in my country was changed in regards to the max legal speed of scooters (from 25km/h to 20km/h). Since then I have not been using my scooter a whole lot, but as I have come across this thing of flashing scooters to increase its max speed, I have now done the exact opposite; Flashed a new firmware, decreasing the max speed from 25km/h to 20 km/h.
But there is an issue.
With its original firmware I was able to go up my street almost at max speed (about 23km/h), but after I flashed my scooter with the "speed downgrade" it still has the same same issue of almost reaching its new "downgraded max speed" (about 18 km/h).
So with its original firmware it has more power than my current firmware, which leads me to the question;
is there anything I can change in my parameters in order to make my scooter reach its new max speed of 20 km/h, since it originally has the power to almost reach 25 km/h in the exact same hill?
I have little to no knowledge in what each parameter do (except speed ofc.), so if anyone knows what I should change, that would be very helpful.
Not sure if all this mases sense, so please ask if anything is unclear!
These are my current parameters:
So...
I bought my M365 Pro in 2019, right before the law in my country was changed in regards to the max legal speed of scooters (from 25km/h to 20km/h). Since then I have not been using my scooter a whole lot, but as I have come across this thing of flashing scooters to increase its max speed, I have now done the exact opposite; Flashed a new firmware, decreasing the max speed from 25km/h to 20 km/h.
But there is an issue.
With its original firmware I was able to go up my street almost at max speed (about 23km/h), but after I flashed my scooter with the "speed downgrade" it still has the same same issue of almost reaching its new "downgraded max speed" (about 18 km/h).
So with its original firmware it has more power than my current firmware, which leads me to the question;
is there anything I can change in my parameters in order to make my scooter reach its new max speed of 20 km/h, since it originally has the power to almost reach 25 km/h in the exact same hill?
I have little to no knowledge in what each parameter do (except speed ofc.), so if anyone knows what I should change, that would be very helpful.
Not sure if all this mases sense, so please ask if anything is unclear!
These are my current parameters: