ScooterHacking.org

Hi, i Have downloaded Scooter Hacking app. Connected, flashed, Changed maximum Speed. Then poped out some window about some activation. Ive confirmed that And since this time my Scooter Is stucked with headlight And brakelight on. 46 km/h on display. Blinking battery line And throttle not doping anything. Can not even turn off the scooter. Can ONLY connect to the Scooter via app but cannot do anything more (info tab attached). What can I do? Thanks in advance.

Pictures here: https://postimg.cc/gallery/YWLprvf

Unscrew the bottom cover of the battery/electronics.

You will see 2-wired yellow connector (Main power) - Disconnect it for 5 sec.

Connect it again, do it quick - it may spark a little but dont worry, everything is ok.

Turn on your scooter and connect to ScooterHacking Utility App.
It will ask you again to activate your scooter... Do it later, press cancel or sth. Don't do it again.

When you cancel activation, you will be able to flash scooter - Flash DRV155 from "Flash" menu. It will flash you stock 1.5.5 firmware and your scooter will be alive again.

-

If you want to flash SHCF, but you are stuck at activation window after flash:

1. Flash DRV155 as i mention above
2. Download DownG app form store
3. Connect scooter to the DownG app.
4. After connection, there will be label to activate scooter - Do it. It will BEEP 5 times.
5. After this, disconnect scooter and connect trough ScooterHacking Utility
6. Flash SHCF - Activation window would not pop up and you will be able to modify firmware "On The Go".

Dont worry about random number on your dashboard. When you move scooter it will show you your speed - The random number is your battery percentage :)

Hi everyone
It appears that the Xiaomi Mi Pro electric scooter is experiencing an issue where the headlight and brake light are stuck on and the display shows a speed of 46 km/h. This may require technical troubleshooting to resolve.gb whatsapp

Hi Guys, It seems like the display and lights on your Mi Pro are malfunctioning a little bit. If that doesn't work, you should contact the manufacturer for additional assistance. Maybe it's possible to reset your Xiaomi Mi Pro electric scooter by switching it off and then back on. Afterward, you might want a good look at the user manual or try contacting the manufacturer for further assistance. It's very important that you report any malfunctioning components as soon as possible in order to protect yourself while you are using the scooter.youtube vanced

The Xiaomi Mi Pro electric scooter appears to be having a technical malfunction, with the headlight, brakelight, and display all indicating a steady speed of 46 km/h. It is best to contact Xiaomi customer service for assistance and solutions.

Having the headlight and brake light on and displaying a speed of 46 km/h on your Xiaomi Mi Pro scooter indicates that it is functioning properly and ready for use. Enjoy your ride!

Hi Guys,revanced
It seems like your Xiaomi Mi Pro electric scooter is facing a technical issue, with the headlight, brakelight, and display all being stuck in certain states. To resolve this, try performing a hard reset by turning off the scooter and disconnecting the battery for a few minutes. If the problem persists, consider seeking assistance from an authorized Xiaomi service center to diagnose and fix the issue properly. Safety is crucial, so avoid riding the scooter until the problem is resolved.

Hey Everyone, youtube vanced
Appreciate the troubleshooting steps provided. Safety first! If the issue persists after a hard reset, it's wise to consult an authorized Xiaoping service center for a proper diagnosis and repair. Avoid riding until resolved. Stay safe.

Hello everyone,
Seems like your Xiaomi Mi Pro is in a bit of a jam with the headlight, brake light, and display showing a constant 46 km/h. A strange pairing, but perhaps it's simply meditating while pretending to cruise.gb whatsapp