Page 1 of 1
Re: Solder points BLE 3.2?
Posted: Wed Jun 15, 2022 3:49 pm
by Janebo81
Hello, I was sending you a email, I was not possible to post pictures here, I also have a copy of MiDu-Flasher_v1. 0.4 for automatic downgrade from ST-LINK if you need
Re: Solder points BLE 3.2?
Posted: Wed Jun 15, 2022 9:39 pm
by Valichella
Can you send it to me too, please. Also want to downgrade BLE from 1.5.5 but didn't find how to connect my BLE to st-link.
Re: Solder points BLE 3.2?
Posted: Fri Jun 17, 2022 9:33 am
by oquska
Solder pins are seems okey but i wasn't sure about c2 transistor. Can anyone successfully flashed this Ble point us to right directions?
Re: Solder points BLE 3.2?
Posted: Thu Jun 30, 2022 11:05 pm
by mober
I have been able to downgrade BLE 157 to BLE 090 the BLE_V3.2 board with a ST-Link, removing this capacitor marked in the image.
Re: Solder points BLE 3.2?
Posted: Sat Jul 02, 2022 10:19 am
by misiozol
same here works no issue .
Re: Solder points BLE 3.2?
Posted: Tue Jul 05, 2022 8:46 am
by Gacunme
drift boss
Hello, I was sending you a email, I was not possible to post pictures here, I also have a copy of MiDu-Flasher_v1. 0.4 for automatic downgrade from ST-LINK if you need
Can you send it to me too?
[email protected]
Re: Solder points BLE 3.2?
Posted: Tue Sep 20, 2022 10:49 am
by Mykola
Нужно ли по процедуре перекрошивки впаять на место этот конденсатор ?
Is it necessary to solder this capacitor into place according to the re - crumbling procedure ?