Unresponsive button, everything else seems ok
Posted: Sun Nov 20, 2022 11:21 am
Hi
I have a Xiamo Mi with dashboard PCB marked OSC BLE V3.2
The button is unresponsive. When the scooter is off, it won't turn on. When the scooter is on button press has no effect.
If the scooter is off and I disconnect and reconnect the battery, the scooter will turn on and can be run.
I've ohm measure the button to make sure the button itself works, and it does. I've also tried to short the button legs as a double check, it also did not have any effect.
There are no signs of water ingress of moisture anywhere.
I also ohm measured the cable between dashboard and the control box just to be sure and it also checks out fine.
Any ideas what could be the problem. What to look for?
Thanks!
I have a Xiamo Mi with dashboard PCB marked OSC BLE V3.2
The button is unresponsive. When the scooter is off, it won't turn on. When the scooter is on button press has no effect.
If the scooter is off and I disconnect and reconnect the battery, the scooter will turn on and can be run.
I've ohm measure the button to make sure the button itself works, and it does. I've also tried to short the button legs as a double check, it also did not have any effect.
There are no signs of water ingress of moisture anywhere.
I also ohm measured the cable between dashboard and the control box just to be sure and it also checks out fine.
Any ideas what could be the problem. What to look for?
Thanks!