Unresponsive button, everything else seems ok

ThomasX
Posts: 4
Joined: Sun Nov 20, 2022 11:05 am

Unresponsive button, everything else seems ok

Postby ThomasX Sun Nov 20, 2022 11:21 am

Hi

I have a Xiamo Mi with dashboard PCB marked OSC BLE V3.2
The button is unresponsive. When the scooter is off, it won't turn on. When the scooter is on button press has no effect.
If the scooter is off and I disconnect and reconnect the battery, the scooter will turn on and can be run.

I've ohm measure the button to make sure the button itself works, and it does. I've also tried to short the button legs as a double check, it also did not have any effect.

There are no signs of water ingress of moisture anywhere.

I also ohm measured the cable between dashboard and the control box just to be sure and it also checks out fine.

Any ideas what could be the problem. What to look for?

Thanks!
ThomasX
Posts: 4
Joined: Sun Nov 20, 2022 11:05 am

Re: Unresponsive button, everything else seems ok

Postby ThomasX Sun Nov 20, 2022 1:22 pm

I also get bluetooth connection, but it disconnects again in a second and reqiures a button press for identification, which of course doesn't work.
teacherverb
Posts: 2
Joined: Fri Dec 02, 2022 2:28 am

Re: Unresponsive button, everything else seems ok

Postby teacherverb Fri Dec 02, 2022 2:31 am

I am also in the same situation as you. It often fails the bluetooth connection system. I often say it's funny because I'm not cool when choosing electronic devices. I don't use the wire link form anymore the backrooms

Return to “Xiaomi Scooters”

Who is online

Users browsing this forum: No registered users and 36 guests