Hi guys thanks for this forum
I have es4 and had so many problems before i couldn't change the speed mode with double click so i decided to change the circuit board and the control board ....
So I changed my control board and the circuit board now my speed is 30mph it was 17mph before ... and mow experiencing some problem now when i turn the night led on the speed goes down to 13 mph when i turn it of it goes back to 30mph
Please help
Segway ninebot es4 problem
Re: Segway ninebot es4 problem
if you solder the old smd over (without replacing to the 0603 and putting a resistor to the led), it will work, but will damage the scooter dc-dc after a couple of weeks/months and ur max speed will be not more than 18kmhthis is the method:Hi guys thanks for this forum
I have es4 and had so many problems before i couldn't change the speed mode with double click so i decided to change the circuit board and the control board ....
So I changed my control board and the circuit board now my speed is 30mph it was 17mph before ... and mow experiencing some problem now when i turn the night led on the speed goes down to 13 mph when i turn it of it goes back to 30mph
Please help
dont forget to resolder this smd to "smd 0603"
Re: Segway ninebot es4 problem
Thank you for the post so do i need to solder or to take out the resistor i took it out completley without soldering on it so basically the resistor place is empty .. does it work like that ??
Re: Segway ninebot es4 problem
solder the 0603 smdThank you for the post so do i need to solder or to take out the resistor i took it out completley without soldering on it so basically the resistor place is empty .. does it work like that ??
- wielandgeorg
- Posts: 17
- Joined: Wed Jun 12, 2019 7:32 pm
Re: Segway ninebot es4 problem
30 mph? every time I get to 21mph it brakes and doesnt go past that. How did you get it to go 30?
you can also just put a 33 ohm 1/4watt resistor between negative wire of the headlight and it should solve it
cheers
you can also just put a 33 ohm 1/4watt resistor between negative wire of the headlight and it should solve it
cheers
Return to “Ninebot ES and E-series”
Who is online
Users browsing this forum: No registered users and 187 guests