I've got a new scooter today and it doesn't work anymore. I always get this error on the consolle:
[ReFlasher] Starting..
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J29S7 (API v2) VID:pID 0483:3748
[ReFlasher] Found ST-Link
Info : Target voltage: 1.562055
Warn : target stm32f1x.cpu examination failed
Error: jtag status contains invalid mode value - communication failure
[ReFlasher] Lost connection
Polling target stm32f1x.cpu failed, trying to reexamine
Examination failed, GDB will be halted. Polling again in 100ms
Info : Previous state query failed, trying to reconnect
Error: jtag status contains invalid mode value - communication failure
[ReFlasher] Lost connection
Polling target stm32f1x.cpu failed, trying to reexamine
Examination failed, GDB will be halted. Polling again in 300ms
Info : starting gdb server for stm32f1x.cpu on 3333
Info : Listening on port 3333 for gdb connections
Error: mem2array: Read @ 0xe0042004, w=4, cnt=1, failed
[ReFlasher] Unknown error, check console
Error executing event examine-end on target stm32f1x.cpu:
[ReFlasher] Unknown error, check console
oocd\scripts\/mem_helper.tcl:6: Error:
in procedure 'ocd_process_reset'
in procedure 'ocd_process_reset_inner' called at file "embedded:startup.tcl", line 247
in procedure 'mmw' called at file "oocd\scripts\target\at32.cfg", line 83
in procedure 'mrw' called at file "oocd\scripts\/mem_helper.tcl", line 36
at file "oocd\scripts\/mem_helper.tcl", line 6
