I have a brand new M365 Pro. Build date 6/19
BMS - 123
BLE - 100
DRV - 160
I used the app at scooterhacking.org to create a custom firmware to raise the max speed of Sport to 40 and Drive to 25. those was the only mods i touched.
Created the bin file and flashed via downG, all went smoothly. After that power button did nothing. I can connect bluetooth but when trying to check version in downG it just says "asking scooter version" and never gets a response. Ive unplugged battery and still the same thing. Power button does nothing. What now???
Side note, I was never able to get MI home to connect to it or the other m365 pro scooter i bought. m365 dashboard, m365 tools both connected fine previously, but they will not connect now either. Tools just says it cant get any info and all lines are blank. Dashboard connects then an error pops up and says " if i have installed the BLE 0.91/1.15, 3rd party apps are not compatible"
M365 Pro froze up after firmware update
Re: M365 Pro froze up after firmware update
I think you have to downgrade the BLE firstly to get Bluetooth compatibility for 3rd party apps. (0.73, 074 or 0.81 as far as I known) It's possible now with STlink which requires a little soldering skills...
After that it can be OK for downG again.
After that it can be OK for downG again.
Re: M365 Pro froze up after firmware update
You should try to flash your BLE with ST-Link to downgrade it.
if that still doesn't work, you should try M365REC and also flash the ESC with it.
if that still doesn't work, you should try M365REC and also flash the ESC with it.
Re: M365 Pro froze up after firmware update
I have this exact model number as OP. This is the first hit on Google when putting in the following:
M365 Pro
BMS - 123
BLE - 100
DRV - 160
Batt Date 28/May/2019
It's currently not bricked.
Pardon but;
How do you mod this more current batch? The website in OP will not work, correct?
M365 Pro
BMS - 123
BLE - 100
DRV - 160
Batt Date 28/May/2019
It's currently not bricked.
Pardon but;
How do you mod this more current batch? The website in OP will not work, correct?
Re: M365 Pro froze up after firmware update
Anyone have a solution for the particular combo of versions? i have the same with the same issues
Tried downgrading the BLE and the process in DownG gets to 100%, and prints "Done" - but then the scooter errors and resets
Tried downgrading the BLE and the process in DownG gets to 100%, and prints "Done" - but then the scooter errors and resets
Who is online
Users browsing this forum: No registered users and 113 guests