ES4 - Motor power constant - Opinion

Saibot
Posts: 2
Joined: Sat Sep 14, 2019 12:53 pm

ES4 - Motor power constant - Opinion

Postby Saibot Sat Sep 14, 2019 1:05 pm

Hi,

I own 2 Ninebot ES4 using your latest CFW.
I have this doubt, due to my weight (95Kg) my scooter while climbing roads (not too high % of inclination) it loosed too fast the speed and feel it with less power.
I wonder about decreasing the Motor constant power a little bit to ensure it have enough strength to keep running/climbing.
Will the motherboard overheat because of this? Is it safe to use 50000 for example instead of the default 51575? The battery will drain too fast?
Nevertheless i should lose some weight i know !!!

What do you recommend? I don't want do drain the battery too fast but i would like to have a little more strength/power.
What value do you recommend?

Regards
Morbidru
Posts: 2
Joined: Wed Sep 25, 2019 12:51 pm

Re: ES4 - Motor power constant - Opinion

Postby Morbidru Wed Sep 25, 2019 12:54 pm

Hi, yes you can "safely" (nothing is ever 100%, but close to it) lower the MPC, Many people are running their MPC as low as 45000, so changing it to 50000 in your case should not be a problem, i even suggest going a little lower, like 49000.
Saibot
Posts: 2
Joined: Sat Sep 14, 2019 12:53 pm

Re: ES4 - Motor power constant - Opinion

Postby Saibot Thu Sep 26, 2019 11:27 am

Many thanks for the feedback.
I will keep the 45000 as minimum safety value and will play a little with those values, and see what fits better my need (to have a balance between battery range and power).
So far i have it with 51000, a few decrease its noticeable while climbing roads.
I will try next 50000.

Thank you.
DB Cooper
Posts: 29
Joined: Mon Jul 29, 2019 1:03 pm

Re: ES4 - Motor power constant - Opinion

Postby DB Cooper Fri Sep 27, 2019 6:00 pm

I recall another member saying their ES4 fried at 48K MPC. JFYI.
User avatar
Lothean
Site Admin
Posts: 137
Joined: Fri Mar 15, 2019 2:40 am
Location: France
Contact:

Re: ES4 - Motor power constant - Opinion

Postby Lothean Sat Sep 28, 2019 6:02 pm

I recall another member saying their ES4 fried at 48K MPC. JFYI.
For that matters, you can even fry it on stock MPC.
DB Cooper
Posts: 29
Joined: Mon Jul 29, 2019 1:03 pm

Re: ES4 - Motor power constant - Opinion

Postby DB Cooper Mon Sep 30, 2019 3:45 pm

I recall another member saying their ES4 fried at 48K MPC. JFYI.
For that matters, you can even fry it on stock MPC.
Of course, but it seemed to happen right after he updated, just sharing it.

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 35 guests