[UPDATED] Activate a new controller / change serial number (BLE, ST Link)

silvera7
Posts: 7
Joined: Sun Aug 25, 2019 6:38 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby silvera7 Wed Sep 25, 2019 12:26 am

Estimados

Soy novato en este tema tengo un SNSC y quiero cambiar el numero de serie para activar la opcion de luces

Como cargo el archivo editado en el metodo 2 ?
English please!

Anyway, you just flash the fulldump the usual way, with STLink or RPi. there are very comprehnsive instructions in this very forum.

I can see you have asked the same question about disco lights several times, are you even sure you have the LED's installed? They are not usually installed in an SNSC.

Hello
Thanks for the answer UgloBuglo, I did a check of the LEDs and they are rgb in the application I do not see the option, it would be good to create a post and comment that it is the BMS, BLE, ESC and what is its function

I don't know if I'm missing any meaning or maybe this is somewhere in the forum I didn't find it

I enclose a photo of the LED strip where the model is, if you look for "WS2812B" you will find that it is a rgb strip


Thank you
James007
Posts: 1
Joined: Fri Apr 12, 2019 9:59 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby James007 Tue Oct 08, 2019 2:05 am

What benefit is there in changing the bms serial number? or under what circumstances might it be necessary to change it?
remove
Posts: 11
Joined: Sun Oct 06, 2019 2:53 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby remove Mon Oct 21, 2019 12:27 pm

Hi!


Im trying to change serialnumber but i cant open the hexfile in ninebot-flasher on method 2.On method 3 i dont have GetVerison and nothing happens when i pers ctrl+shift+m. Can you help me?
noire
Posts: 1
Joined: Fri Oct 25, 2019 5:38 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby noire Fri Oct 25, 2019 5:45 pm

Hi!


Im trying to change serialnumber but i cant open the hexfile in ninebot-flasher on method 2.On method 3 i dont have GetVerison and nothing happens when i pers ctrl+shift+m. Can you help me?
I am also having this issue. Cant see ¨GETVERSION¨ in Ninebot flasher, and nothing happens when typing ctrl+shift+M.

What do I need to do to be able to do this?
Mazzamotorsport
Posts: 3
Joined: Sat Oct 19, 2019 7:23 am

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby Mazzamotorsport Sun Oct 27, 2019 8:03 am

Hi friends..
The problem is that I don't have a win 10 PC to use a ninebot flasher
Do you know if exist an a android app or an other way to change serial number.
Because I have flashed dash and esc... and when I turn on... it shows error 35...

Someone can help me?
Thanks..
doodie
Posts: 1
Joined: Wed Sep 25, 2019 2:08 am

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby doodie Mon Nov 04, 2019 4:52 pm

can't see the serial breakdown jpg?
dannvk
Posts: 1
Joined: Fri Jan 17, 2020 8:49 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby dannvk Fri Jan 17, 2020 9:05 pm

I use connect dashboard and now error 10 appears on the screen, use connect_ESC and exit this error, and continue on screen error 10, please help

===================================================
Ninebot ESx ESC Flasher - ScooterHacking.org
===================================================
Waiting for flash to start...

Esperando 2 segundos, presione una tecla para continuar ...
Open On-Chip Debugger 0.10.0 (2019-02-10) [https://github.com/sysprogs/openocd]
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
WARNING: interface/stlink-v2.cfg is deprecated, please switch to interface/stlink.cfg
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
none separate
Info : clock speed 1000 kHz
Info : STLINK V2J34S7 (API v2) VID:PID 0483:3748
Info : Target voltage: 3.162791
Warn : UNEXPECTED idcode: 0x0bb11477
Error: expected 1 of 1: 0x1ba01477
Mykhailo
Posts: 1
Joined: Wed Jan 29, 2020 8:52 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby Mykhailo Wed Jan 29, 2020 8:56 pm

hi everyone. I have to change the serial number on the new controller of my ninebot z10. Is there any possibility to do this using ninebot flasher? I managed to connect my wheel to the Ninebot flasher but all the buttons seem to be inactive...
jotna200
Posts: 1
Joined: Sat Mar 28, 2020 8:06 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby jotna200 Sun Mar 29, 2020 9:22 am

Want to do this to my M365, how can i find what to change in the code of a CFW of the m365 to change the serial number?

Thanks
remove
Posts: 11
Joined: Sun Oct 06, 2019 2:53 pm

Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)

Postby remove Tue Mar 31, 2020 10:38 am

Is it possible to change speed and motor power just by flash firmware thru ESdownG app on a es2?

Return to “Ninebot ES”

Who is online

Users browsing this forum: MSN [Bot] and 1 guest