BLE365Rec : BLE downgrade for M365/M365 pro

User avatar
Lothean
Site Admin
Posts: 137
Joined: Fri Mar 15, 2019 2:40 am
Location: France
Contact:

BLE365Rec : BLE downgrade for M365/M365 pro

Postby Lothean Sat Nov 02, 2019 11:11 pm

Here's how to downgrade your M365 BLE if it shipped with clone/encrypted firmware or if you updated it through the Mi Home app:
  • Run "STM32 ST-LINK Utility v4.4.0 setup.exe" for driver installation.
  • Connect ST-link according to the following schematics:
    For M365:
    Image
    For M365 Pro:
    Image
    Use the M365 schematic and connect to the same 5V.

    Make sure to remove C16 on your M365 dashboard, and C2 on your Pro dashboard. These capacitors might not be present on clone boards.
  • Plug ST-link into a USB port and wait until driver installation has ended
  • Run batch file (ble365rec.bat for m365 or blePROrec.bat for PRO)
  • If everything goes well, you should get something like this:
    Image
You can now flash your scooter using M365 DownG and use any third-party apps.

[Get BLE365Rec]
Virata
Posts: 1
Joined: Sun Mar 06, 2022 2:50 pm

Re: BLE365Rec : BLE downgrade for M365/M365 pro

Postby Virata Sun Mar 06, 2022 2:54 pm

Hello. This system works for the Scooter 3?. I have been blocked. Thanks.

PD. The BLE board version I have is V3.2
https://es.aliexpress.com/item/33046544977.html

I don't know if any condenser needs to be removed.
supaplex030
Posts: 1
Joined: Wed May 18, 2022 4:52 pm

Re: BLE365Rec : BLE downgrade for M365/M365 pro

Postby supaplex030 Wed May 18, 2022 5:06 pm

Hello. This system works for the Scooter 3?. I have been blocked. Thanks.

PD. The BLE board version I have is V3.2
https://es.aliexpress.com/item/33046544977.html

I don't know if any condenser needs to be removed.
My Pro 2 has this same BLE board, nothing is marked, I don’t know which condenser is which and where to connect the ST-LINK.

Return to “Xiaomi Scooters”

Who is online

Users browsing this forum: No registered users and 1 guest