SNSC IoT connector to extra battery/bluetooth speaker device?

colonelkernel
Posts: 17
Joined: Sun May 26, 2019 12:51 am

SNSC IoT connector to extra battery/bluetooth speaker device?

Postby colonelkernel Sun Nov 10, 2019 2:39 am

Essentially, would the plugin from the control board going to the IoT capsule be able to carry power through it to either provide extra voltage through an extra battery like seen in the Trace cut modification? Or possibly power a Bluetooth device that connects to both the stock IoT speaker and the socket for power and to output music? It can definitely carry power because it has to power the IoT, but I'm not sure if it could provide power back into the scooter. If it can, it may be easy to add another battery through the connector in the first image seen here:
Attachments
1.jpg
This is the connector on the inside of the IoT that provides power to the original hardware that was in the IoT
1.jpg (2.69 MiB) Viewed 39 times
2.jpg
This is the connector from the back of the IoT that connects to the control board
2.jpg (2.7 MiB) Viewed 39 times
3.jpg
This is the wire coming from the control board that connects to the back of the IoT
3.jpg (3.98 MiB) Viewed 39 times
colonelkernel
Posts: 17
Joined: Sun May 26, 2019 12:51 am

Re: SNSC IoT connector to extra battery/bluetooth speaker device?

Postby colonelkernel Sun Nov 10, 2019 2:43 am

continued
Attachments
4.jpg
This is the connector to the speaker, only 2 prongs. If there is a bluetooth device that could connect to both the inside power connector and this plugin, it could be used to play music
4.jpg (2.92 MiB) Viewed 38 times
5.jpg
Inside view of the IoT shell halves
5.jpg (3.15 MiB) Viewed 38 times

Return to “Ninebot ES”

Who is online

Users browsing this forum: No registered users and 8 guests