M365 after flashing (Doesnt drive) no firmware etc.. ST LINK doesnt work.

GoldenF33T
Posts: 1
Joined: Thu Jul 30, 2020 9:02 pm

M365 after flashing (Doesnt drive) no firmware etc.. ST LINK doesnt work.

Postby GoldenF33T Thu Jul 30, 2020 9:20 pm

Hello,

Tried to flash with xiaomi-nineboot flasher on phone (blue one) from: ESC 5.4.0; BLE 0.7.2; BMS 1.2.6 to original xiaomi m365 "DRV141.BIN" from the apps menu. After flashing, doesnt work, not driving etc. Only boots up for 3 or 4 times of (0 6 signals) and then turns off, bluetooth shows up but no app that could bring version or something similar to working condition. So i have bought ST LINK to fix the firmware, but couldnt connect via cmd openocd -f stlink_nrf51.cfg or BLE365REC. Used wiring as shown in BLE365REC photo. Tried 3.3V and 5V, no difference. Also i have noticed that my ST LINK has the same pin out and looking but the pins marking is different between photos.

I'll bring photos of my stlink with BLE connected. Any ideas or someone had the same issue?
I have headache with this issue, that i cant resolve..

::::::: Tried as they advertise ::::::::
https://www.spzshop.com/blogs/best-prac ... e-solution

I hope this thread will help for others.

Regards

Return to “Xiaomi M365 / M365 Pro”

Who is online

Users browsing this forum: No registered users and 0 guests