ScooterHacking ReFlasher - ESC recovery/downgrade

If you want to discuss about random things
venom125
Posts: 4
Joined: Mon Jul 24, 2023 9:32 am

Re: ScooterHacking ReFlasher - ESC recovery/downgrade

Postby venom125 Mon Jul 24, 2023 9:36 am

Hello, is it possible to somehow flash DRV on ninebot d18?
venom125
Posts: 4
Joined: Mon Jul 24, 2023 9:32 am

Re: ScooterHacking ReFlasher - ESC recovery/downgrade

Postby venom125 Mon Jul 24, 2023 6:03 pm

I solved the problem myself, thanks for your attention!
Zw0k
Posts: 2
Joined: Wed Aug 09, 2023 5:11 pm

Re: ScooterHacking ReFlasher - ESC recovery/downgrade

Postby Zw0k Wed Aug 09, 2023 5:32 pm

Hello

i made this first time so i can not conekt to Target

I have made all right bud no conection

[ReFlasher] Starting..
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 450 kHz
Info : STLINK V2J34S7 (API v2) VID:PID 0483:3748
[ReFlasher] Found ST-Link
Info : Target voltage: 3.270400
Error: init mode failed (unable to connect to the target)
[ReFlasher] Couldn't connect to target

What can i do

i use the board from the pic

The LED´s blink grean and one red LED is on

i hope for help
Zw0k
Posts: 2
Joined: Wed Aug 09, 2023 5:11 pm

Re: ScooterHacking ReFlasher - ESC recovery/downgrade

Postby Zw0k Wed Aug 09, 2023 6:37 pm

I have use zadig-2.8 for the USB Connection

bud ther is one Mistake
Se Pic Below
Is this the reason ?

No WCID on USB
Bollshii
Posts: 2
Joined: Wed Aug 23, 2023 6:10 pm

Re: ScooterHacking ReFlasher - ESC recovery/downgrade

Postby Bollshii Wed Aug 23, 2023 6:17 pm

Hello

i made this first time so i can not conekt to Target

I have made all right bud no conection

[ReFlasher] Starting..
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 450 kHz
Info : STLINK V2J34S7 (API v2) VID:PID 0483:3748
[ReFlasher] Found ST-Link
Info : Target voltage: 3.270400
Error: init mode failed (unable to connect to the target)
[ReFlasher] Couldn't connect to target

What can i do

i use the board from the pic

The LED´s blink grean and one red LED is on

i hope for help

hey i had the same error.

STM32 ST-LINK Utility v4.6.0 is very likely what you are missing with this tool update the stick without having anything connected after that everything should work as described


Read the instructions that solved my problem.

https://rollerplausch.com/threads/st-li ... ring.4270/
travelhunza43
Posts: 1
Joined: Sat Feb 24, 2024 4:20 pm

Re: ScooterHacking ReFlasher - ESC recovery/downgrade

Postby travelhunza43 Sat Feb 24, 2024 4:26 pm

ScooterHacking ReFlasher is a tool designed for electric scooter enthusiasts to modify or restore the firmware of their devices. It enables users to recover or downgrade the Electronic Speed Controller (ESC) firmware, granting them greater control over their scooter's performance. With ReFlasher, users can customize settings, unlock speed limits, or revert to previous firmware versions for optimal performance. This tool empowers users to tailor their scooter's performance to their preferences while also providing the option to revert changes if needed. ReFlasher is a valuable asset for those looking to enhance their scooter experience through firmware modifications. https://travelhunza.com/

Return to “Off topic”

Who is online

Users browsing this forum: No registered users and 3 guests